UBIQUITI Lite 8 PoE; (4) GbE PoE+, (4) GbE ports; 52W total PoE availability; Wall mountable.

Features - Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for half-duplex mode - Supports MAC address auto-learning and auto-aging - LED indicators for monitoring power, link, activity, 100Mbps - Standard 19" Rack-mountable steel case - Internal universal power supply Specifications - Standards and Protocols: IEEE802.3, 802.3u, 802.3x, CSMA/CD, TCP/IP - Basic Function: * Wire-speed Performance * MAC Address Auto-Learning and Auto-aging * IEEE802.3x flow control for Full-Duplex Mode and backpressure for Half-Duplex Mode - Backbound Bandwidth: 9.6Gbps - MAC Address Table: 8k - Forwarding Rate: * 10BASE-T: 14880pps/port * 100BASE-TX: 148800pps/port - Transmission Method: Store-and-Forward - Ports: 48× 10/100Mbps Auto-Negotiation RJ45 ports (Auto MDI/MDIX) - Network Media: * 10Base-T: UTP category 3, 4, 5 cable (max. 100m); EIA/TIA-568 100 Ohm STP (max. 100m) * 100Base-Tx: UTP category 5, 5e cable (max. 100m); EIA/TIA-568 100 Ohm STP (max. 100m) - LED Indicators: Power, Link/Act, 100Mbps - Safety Emission: FCC, CE - Dimensions (W×D×H): 440×260×44 mm - Environment: * Operating Temperature: 0C - 40C (32F - 104F) * Storage Temperature: -40C - 70C (-40F - 158F) * Operating Humidity: 10% - 90% non-condensing * Storage Humidity: 5% - 90% non-condensing - Power: 100-240VAC, 50/60Hz

D-LINK 24-Port Gigabit Unmanaged Desktop Switch

Features - 62W PoE Budget: 4× 802.3at/af-compliant PoE+ ports with a total power supply of 62W - Full Gigabit Ports: 4× gigabit PoE+ ports and 4× gigabit non-PoE ports provide high-speed connections - Integrated into Omada SDN: Centralized Cloud Management, and Intelligent Monitoring - Centralized Management: Cloud access and Omada app for ultra convenience and easy management - Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more - Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping Specifications HARDWARE FEATURES - Standards and Protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x - Interface: * 8× 10/100/1000 Mbps RJ45 Ports (Ports 1–4 Support 802.3at/af PoE+) * Auto-Negotiation/Auto MDI/MDIX - Network Media: * 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) * 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) - Fan Quantity: Fanless - Power Supply: External Power Adapter (Output: 53.5 VDC/ 1.31 A) - Power Consumption: * 7.9 W (220 V/50 Hz) (no PD connected) * 79.2 W (220 V/50 Hz) (with 62 W PD connected) - PoE Ports (RJ45): * Standard: 802.3af/at compliant * PoE Ports: 4 Ports * Power Supply: 62 W* - Dimensions (W×D×H): 209×126×26 mm PERFORMANCE - Bandwidth/Backplane: 16 Gbps - MAC Address Table: 8k - Packet Buffer Memory: 4.1 Mbit - Jumbo Frame: 9 KB SOFTWARE FEATURES - Quality of Service: * 802.1p CoS/DSCP priority * 8 priority queues * Priority Schedule Mode: SP (Strict Priority), WRR (Weighted Round Robin) * Queue Weight Config * Bandwidth Control: Port/Flow-based Rating Limit * Smoother Performance * Storm Control: Multiple Control Modes(kbps/ratio), Broadcast/Multicast/Unknown-Unicast Control - L2 and L2+ Features: * DHCP Relay: DHCP VLAN Relay * DHCP L2 Relay * Link Aggregation: Static link aggregation, 802.3ad LACP, Up to 8 aggregation groups and up to 8 ports per group * Spanning Tree Protocol: 802.1D STP, 802.1w RSTP, 802.1s MSTP, STP Security: TC Protect, BPDU Filter/Protect, Root Protect * Loopback Detection * Flow Control: 802.3x Flow Control * Mirroring: Port Mirroring, CPU Mirroring, One-to-One, Many-to-One, Flow-Based, Ingress/Egress/Both * Device Link Detect Protocol (DLDP) * 802.1ab LLDP/ LLDP-MED - L2 Multicast: * 511 IPv4, IPv6 shared multicast groups * IGMP Snooping: IGMP v1/v2/v3 Snooping, Fast Leave, IGMP Snooping Querier, Static Group Config * Multicast VLAN Registration (MVR) * Multicast Filtering * MLD Snooping: MLD v1/v2 Snooping, Fast Leave, MLD Snooping Querier, Static Group Config * Limited IP Multicast (256 profiles and 16 entries per profile) - IPv6 Support: * IPv6 Dual IPv4/IPv6 * Multicast Listener Discovery (MLD) Snooping * IPv6 neighbor discovery (ND) * Path maximum transmission unit (MTU) discovery * Internet Control Message Protocol (ICMP) version 6 * TCPv6/UDPv6 * IPv6 applications: DHCPv6 Client, Ping6, Tracert6, Telnet (v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP - VLAN: * VLAN Group: Max. 4K VLAN Groups * 802.1Q tag VLAN * MAC VLAN * Protocol VLAN * GVRP * Voice VLAN - Access Control List: * Support up to 230 entries * Time-Range: Time Slice, Week Time-Range, Absolute Time-Range, Holiday * Time-based ACL * MAC ACL: Source MAC, Destination MAC, VLAN ID, User Priority, Ether Type * IP ACL: Source IP, Destination IP, IP Protocol, TCP Flag, TCP/UDP Source Port, TCP/UDP Destination Port, DSCP/IP TOS * IPv6 ACL * Combined ACL * Rule Operation: Permit/Deny * Policy Action: Mirror, Rate Limit, Redirect, QoS Remark * ACL Rules Binding: Port Binding, VLAN Binding * Actions for flows: Mirror (to supported interface), Redirect (to supported interface), Rate Limit, QoS Remark - Security: * AAA * 802.1X: Port-based authentication, MAC (Host) based authentication, Authentication Method includes PAP/EAP-MD5, MAB, Guest VLAN, Support Radius authentication and accountability * IP/IPv6-MAC Binding: 512 Binding Entries, DHCP Snooping, DHCPv6 Snooping, ARP Inspection, ND Detection * IP Source Guard: 253 Entries, Source IP+Source MAC * IPv6 Source Guard: 183 Entries, Source IPv6 Address+Source MAC * DoS Defend * Static/Dynamic/Permanent Port Security: Up to 64 MAC addresses per port * Broadcast/Multicast/Unicast Storm Control: kbps/ratio control mode * Port Isolation * Secure web management through HTTPS with SSLv3/TLS 1.2 * Secure Command Line Interface (CLI) management with SSHv1/SSHv2 * IP/Port/MAC-based access control - MIBs: * MIB II (RFC1213) * Bridge MIB (RFC1493) * P/Q-Bridge MIB (RFC2674) * Radius Accounting Client MIB (RFC2620) * Radius Authentication Client MIB (RFC2618) * Remote Ping, Traceroute MIB (RFC2925) * Support TP-Link private MIBs * RMON MIB(RFC1757, rmon 1,2,3,9) MANAGEMENT - Omada App: Yes - Centralized Management: * Omada Hardware Controller (OC300) * Omada Hardware Controller (OC200) * Omada Software Controller - Cloud Access: Yes (Through OC300, OC200, or Omada Software Controller) - Management Features: * Web-based GUI * Command Line Interface (CLI) through telnet * SNMPv1/v2c/v3 * SNMP Trap/Inform * RMON (1,2,3,9 groups) * SDM Template * DHCP/BOOTP Client * Dual Image, Dual Configuration * CPU Monitoring * Cable Diagnostics * EEE * SNTP * System Log OTHERS - Certification: CE, FCC, RoHS - Package Contents: TL-SG2008P, Power Adapter, Installation Guide, Rubber Feet - System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 7/8/10, MAC OS, NetWare, UNIX or Linux - Environment: * Operating Temperature: 0C to 40 (32F to 104) * Storage Temperature: -40C to 70 (-40F to 158) * Operating Humidity: 10% - 90% RH non-condensing * Storage Humidity: 5% - 90% RH non-condensing

WHAT THIS PRODUCT DOES - The TL-SG1008MP is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 153W, up to 30W per port, TL-SG1008MP can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1008MP can save the power consumption, making it an eco-friendly solution for your business network. How This Product Works All 8 ports of TL-SG1008MP support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are no electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones. OVERLOAD ARRANGEMENT - TL-SG1008MP has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 153W, a priority will be arranged among the 8 PoE+ ports, at which point the system will cut off the power of the lowest-priority port. PORT PRIORITY FUNCTION - Priority (port 1 > port 2 > port 3 > port 4 > port 5 > port 6 > port 7 > port 8): This function helps protect the system if the power becomes overloaded. For example, if port 1, 2, 4, 5 and 7 are using 30W (maximum power per port is 30W, the system power is 153W in total), and there is an additional device inserted into Port 3 at 25W, the system will cut off the power of Port 7 in response to the power exceeding the 153W limit., This means Port 1, 2, 4 and 5 will use 30W, and Port 3 will use 25W, with no power will be supplied to Port 7 as it has the lowest designated priority among the ports in use. EASY TO USE - TL-SG1008MP is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-Link TL-SG1008MP 8-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE+ is a great choice for expanding your home or office network. Features - 8 10/100/1000Mbps RJ45 ports - Equipped with 8 PoE+ supported ports to transfer data and power over a single cable - Works with IEEE 802.3af/at compliant devices, expanding home and office networks - Innovative energy-efficient technology reduces power consumption - Supports PoE+ standard with total power budget of 153W* and up to 30W per port - Plug and play design, no configuration required Specifications - Interface * 8 10/100/1000Mbps RJ45 Ports * AUTO Negotiation/AUTO MDI/MDIX - Network Media * 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) * EIA/TIA-568 100? STP (maximum 100m) * 100BASE-TX: UTP category 5, 5e cable (maximum 100m) * EIA/TIA-568 100? STP (maximum 100m) * 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) * EIA/TIA-568 100? STP (maximum 100m) - Fan Quantity: 1 - Physical Security Lock: No - Power Supply: 100-240VAC, 50/60Hz - Packet Forwarding Rate: 11.904 Mpps - PoE+ Ports(RJ45) Standard: 802.3af/at compliant - PoE+ Ports: 8 Ports - Power Supply: 153W - Mac Address Table: 4K - Buffer Size: 1.5Mbits - Jumbo Frame: 16 KB - Switching Capacity: 16Gbps - Dimensions ( W x D x H ): 11.6*7.1*1.7 in. (294*180*44 mm) - Mounting: Desktop/Rack Mountable - Max Power Consumption: * 7.31 W(220V/50Hz. no PD connected) * 177 W(110V/60Hz. with 153W PD connected) - Max Heat Dissipation * 24.93 BTU/h(no PD connected) * 603.57 BTU/h(with 153W PD connected) SOFTWARE FEATURES - Advanced Features * Compatible With IEEE 802.3af/at Compliant PDs * Priority Function * Mac Address Auto-Learning And Auto-Aging * IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode - Transfer Method: Store-And-Forward OTHERS - Certification: FCC, CE, RoHS - Package Contents: TL-SG1008MP, Power Cord, Installation Guide, Rackmount Kit, Rubber Feet - Environment: Operating Temperature: 0?~50? (32?~122?) - Storage Temperature: -40?~70? (-40?~158?) - Operating Humidity: 10%~90% non-condensing - Storage Humidity: 5%~90% non-condensing

- Cloud Router Switch 112-8G-4S-IN is a "small size low cost" member of our CRS series - It comes with eight Gigabit Ethernet ports and four SFP cages - Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS - All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes Specifikacija - CPU nominal frequency: 400 MHz - CPU core count: 1 - Size of RAM: 128 MB - 10/100/1000 Ethernet ports: 8 - Power Jack: 1 - PoE in: Yes - Supported input voltage: 10 V - 57 V - Voltage Monitor: Yes - PCB temperature monitor: Yes - Dimensions: 200×143×44 mm - Operating System: RouterOS - Operating temperature range: -30C to +55C - License level: 5 - Current Monitor: Yes - CPU: QCA8511 - Max Power consumption: 13.5W - SFP ports: 4 - Serial port: RJ45 - Storage type: FLASH - Storage size: 16 MB

HARDWARE FEATURES Interface • 16× 10/100/1000 Mbps RJ45 Ports • 2× Gigabit SFP Slots Fan Quantity Fanless Power Supply 100-240 V AC~50/60 Hz Dimensions ( W x D x H ) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 12.3 W (220 V/50 Hz) Max Heat Dissipation 41.97 BTU/hr PERFORMANCE Switching Capacity 36 Gbps Packet Forwarding Rate 26.8 Mpps MAC Address Table 8K Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect • Loopback Detection - Port-based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • Supports 511 (IPv4, IPv6) IGMP groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MVR • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1q Tagged VLAN • MAC VLAN: 12 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - DHCP Snooping - ARP Inspection - IPv4 Source Guard • IPv6-MAC-Port Binding - DHCPv6 Snooping - ND Detection - IPv6 Source Guard • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio/pps control mode • IP/Port/MAC based access control • 802.1X - Port based authentication - Mac based authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication and accountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP • 316 ARP Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay • DHCP L2 Relay Management • Web-based GUI • Command Line Interface (CLI) through console port, telnet • SNMPv1/v2c/v3 - Trap/Inform - RMON (1, 2, 3, 9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log Advanced Features • Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule • ZTP (Zero-Touch Provisioning)* OTHERS Certification CE, FCC, RoHS Package Contents • TL-SG2218 Switch • Power Cord • Quick Installation Guide • Rackmount Kit • Rubber Feet Environment • Operating Temperature: 0–40 ? (32–104 ?); • Storage Temperature: -40–70 ? (-40–158 ?) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing

Features - 61 W PoE Budget: 8× 802.3af/at-compliant PoE+ ports with a total power supply of 61 W - Full Gigabit Ports: 8× gigabit PoE+ ports and 2× gigabit SFP Slots provide high-speed connections - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring - Centralized Management: Cloud access and Omada app for ultra convenience and easy management - Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm Control, DHCP Snooping, 802.1X, Radius Authentication, and more - Optimized Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping - Versatile Management: WEB/CLI managed modes, SNMP, and RMON bring abundant management features Specifications HARDWARE FEATURES - Standards and Protocols: * IEEE 802.3i, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, * IEEE 802.3ad, IEE 802.3af, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, * IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x - Interface: * 8× 10/100/1000Mbps RJ45 Ports * 2× 1000Mbps SFP Slots * (Auto-Negotiation/Auto MDI/MDIX) - Network Media: * 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) * 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) * 1000BASE-X: MMF, SMF - Fan Quantity: Fanless - Power Supply: * 100~240VAC, 50/60Hz * External Power Adapter(Output: 53.5VDC/1.31A) - Power Consumption: * 10.3 W (220 V/50 Hz) (no PD connected) * 76.5 W (220 V/50 Hz) (with 61 W PD connected) - PoE Ports (RJ45): * Standard: 802.3af/at compliant * PoE Ports: 8 Ports * Power Supply: 61W - Dimensions (W×D×H): 209×126×26 mm PERFORMANCE - Bandwidth/Backplane: 20 Gbps - Packet Forwarding Rate: 14.88Mpps - MAC Address Table: 8k - Packet Buffer Memory: 4.1 Mbit - Jumbo Frame: 9 KB SOFTWARE FEATURES - Quality of Service: * 802.1p CoS/DSCP priority * 8 priority queues * Priority Schedule Mode - SP (Strict Priority) - WRR (Weighted Round Robin) * Queue Weight Config * Bandwidth Control - Port/Flow based Rating Limit * Smoother Performance * Storm Control - Multiple Control Modes(kbps/ratio) - Broadcast/Multicast/Unknown-Unicast Control L2 and L2+ Features * 16 IP Interfaces - Support IPv4/IPv6 Interface * Static Routing - 32 IPv4/IPv6 Static Routes * DHCP Server * DHCP Relay - DHCP Interface Relay - DHCP VLAN Relay * DHCP L2 Relay * Static ARP * Proxy ARP * Gratuitous ARP * Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group * Spanning Tree Protocol - 802.1D STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter/Protect, -Root Protect * Loopback Detection * Flow Control - 802.3x Flow Control * Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Flow-Based - Ingress/Egress/Both * Device Link Detect Protocol (DLDP) * 802.1ab LLDP/ LLDP-MED VLAN * VLAN Group - Max. 4K VLAN Groups * 802.1Q tag VLAN * MAC VLAN: 12 Entries * Protocol VLAN * GVRP * Voice VLAN Access Control List * Support up to 230 entries * Time-Range - Time Slice - Week Time-Range - Absolute Time-Range - Holiday * Time-based ACL * MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type * IP ACL - Source IP - Destination IP - IP Protocol - TCP Flag - TCP/UDP Source Port - TCP/UDP Destination Port - DSCP/IP TOS * IPv6 ACL * Combined ACL * Rule Operation - Permit/Deny * Policy Action - Mirror - Rate Limit - Redirect - QoS Remark * ACL Rules Binding - Port Binding - VLAN Binding * Actions for flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark Security * AAA * 802.1X - Port based authentication - MAC (Host) based authentication - Authentication Method includes PAP/EAP-MD5 - MAB - Guest VLAN - Support Radius authentication and accountability * IP/IPv6-MAC Binding - 512 Binding Entries - DHCP Snooping - DHCPv6 Snooping - ARP Inspection - ND Detection * IP Source Guard - 253 Entries - Source IP+Source MAC * IPv6 Source Guard - 183 Entries - Source IPv6 Address+Source MAC * DoS Defend * Static/Dynamic/Permanent Port Security - Up to 64 MAC addresses per port * Broadcast/Multicast/Unicast Storm Control - kbps/ratio control mode * Port Isolation * Secure web management through HTTPS with SSLv3/TLS 1.2 * Secure Command Line Interface (CLI) management with SSHv1/SSHv2 * IP/Port/MAC based access control MANAGEMENT - Omada App:Yes - Centralized Management: * Omada Hardware Controller (OC300) * Omada Hardware Controller (OC200) * Omada Software Controller - Cloud Access: Yes (Through OC300, OC200, or Omada Software Controller) - Management Features: * Web-based GUI * Command Line Interface (CLI) through telnet * SNMPv1/v2c/v3 * SNMP Trap/Inform * RMON (1,2,3,9 groups) * SDM Template * DHCP/BOOTP Client * Dual Image, Dual Configuration * CPU Monitoring * Cable Diagnostics * EEE * SNTP * System Log OTHERS - Certification: CE, FCC, RoHS - Package Contents: * TL-SG2210P * Power Adapter * Installation Guide * Rubber Feet - System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 7/8, MAC OS, NetWare, UNIX or Linux. - Environment: * Operating Temperature: 0 C~40 C ; * Storage Temperature: -40 C ~70 C * Operating Humidity: 10%~90% non-condensing * Storage Humidity: 5%~90% non-condensing

- 10/100/1000 Ethernet ports: 24 - Power Jack: 1 - PoE in: Yes - Supported input voltage: 8 V - 30 V - Dimensions: 440×144×44 mm - Operating System: SwOS - Tested ambient temperature: -40C to +70C - Max Power consumption: 19W - SFP+ ports: 2 - Storage type: FLASH - Storage size: 2 MB

Hardware Specifications - Copper Ports: 24× 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports - SFP/mini-GBIC Slots: 2× 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode - Console: 1× RS232-to-RJ45 serial port (115200, 8, N, 1) - Reset Button: System factory default - Switch Architecture: Store-and-Forward - Switch Fabric: 52Gbps / non-blocking - Switch Throughput@64 bytes: 38.6Mpps @64 bytes - MAC Address Table: 8K entries - Shared Data Buffer: 4.1 megabits - Flow Control: * IEEE 802.3x pause frame for full-duplex * Back pressure for half-duplex - Jumbo Frame: 9216 bytes - Reset Button: > 5 sec: Factory default - LED (System): * Power (Green) * 10/100/1000T RJ45 Interfaces (Port 1 to Port 24) * 1000 LNK / ACT (Green), 10/100 LNK/ACT (Orange) * 100/1000Mbps SFP Interfaces (Port 25 to Port 26) * 1000 LNK / ACT (Green), 100 LNK/ACT (Orange) - Power Requirements: 100~240V AC, 50/60Hz, 0.8A (max.) - Power Consumption / Dissipation: Max. 14 watts / 47 BTU - Dimensions (W×D×H): 445×207×45 mm (1U height) - Weight: 2.1kg - ESD Protection: Yes - Enclosure: Metal Layer 2 Functions - Port Mirroring: * TX / RX / Both * Many-to-1 monitor - VLAN: * 802.1Q tagged-based VLAN * Up to 256 VLAN groups, out of 4094 VLAN IDs * 802.1ad Q-in-Q tunneling (VLAN stacking) * Voice VLAN * Protocol VLAN * Private VLAN (Protected port) * GVRP * Management VLAN - Link Aggregation: * IEEE 802.3ad LACP and static trunk * Supports 8 groups of 8-port trunk - Spanning Tree Protocol: * STP, IEEE 802.1D Spanning Tree Protocol * RSTP, IEEE 802.1w Rapid Spanning Tree Protocol * MSTP, IEEE 802.1s Multiple Spanning Tree Protocol * STP BPDU Guard, BPDU Filtering and BPDU Forwarding - IGMP Snooping: * IPv4 IGMP (v2 / v3) Snooping * IGMP Querier * Up to 256 multicast groups - MLD Snooping: IPv6 MLD (v1 / v2) snooping, up to 256 multicast groups - Access Control List: * IPv4/IPv6 IP-based ACL / MAC-based ACL * IPv4/IPv6 IP-based ACE / MAC-based ACE - QoS: * 8 mapping ID to 8 level priority queues ** Port Number ** 802.1p priority ** DSCP / IP Precedence of IPv4 / IPv6 packets * Traffic classification based, strict priority and WRR * Ingress / Egress Rate Limit per port bandwidth control - Security: * IEEE 802.1X port-based authentication * Built-in RADIUS client to co-operate with RADIUS server * RADIUS / TACACS+ authentication * IP-MAC port binding * MAC filtering * Static MAC address * DHCP snooping and DHCP Option82 * STP BPDU guard, BPDU filtering and BPDU forwarding * DoS attack prevention * ARP inspection * IP source guard * Storm control support ** Broadcast / Unknown-Unicast / Unknown-Multicast Management Functions - Basic Management Interfaces: * RJ45 Console / Web browser / Telnet / SNMP v1, v2c, v3 * Firmware upgrade by HTTP / TFTP protocol through Ethernet network * Configuration upload / download through HTTP / TFTP * Remote / Local Syslog * System log * LLDP protocol * SNTP * PLANET Smart Discovery Utility - Secure Management Interfaces: HTTPs, SNMP v3 - SNMP MIBs: * RFC 3635 Ethernet-like MIB * RFC 2863 Interface Group MIB * RFC 2819 RMON (1, 2, 3, 9) * RFC 1493 Bridge MIB Standards Conformance - Regulation Compliance: FCC Part 15 Class A, CE - Standards Compliance: * IEEE 802.3 10BASE-T * IEEE 802.3u 100BASE-TX / 100BASE-FX * IEEE 802.3z Gigabit SX/LX * IEEE 802.3ab Gigabit 1000BASE-T * IEEE 802.3x Flow Control and Back pressure * IEEE 802.3ad Port Trunk with LACP * IEEE 802.1D Spanning Tree protocol * IEEE 802.1w Rapid Spanning Tree protocol * IEEE 802.1s Multiple Spanning Tree protocol * IEEE 802.1p Class of Service * IEEE 802.1Q VLAN Tagging * IEEE 802.1x Port Authentication Network Control * IEEE 802.1ab LLDP * RFC 768 UDP * RFC 793 TFTP * RFC 791 IP * RFC 792 ICMP * RFC 2068 HTTP * RFC 1112 IGMP version 1 * RFC 2236 IGMP version 2 * RFC 3376 IGMP version 3 * RFC 2710 MLD version 1 * RFC 3810 MLD version 2 Environment - Operating: * Temperature: 0 - 50 degrees C * Relative Humidity: 5% - 95% (non-condensing) - Storage: * Temperature: -10 - 70 degrees C * Relative Humidity: 5% - 95% (non-condensing)

- 16× 10/100/1000 Mbps RJ45 ports - With 16 PoE+ ports, transfers data and power on one single cable - Compliance with IEEE 802.3af/at PoE+, the switch supports PoE Power up to 30 W for each PoE port - Supports PoE Power up to 120 W for all PoE ports* - Up to 250 m data and power transmission range under Extend Mode** - Priority Mode ensures high priority of ports 1–4 to guarantee the quality of the sensitive applications - Isolation Mode allows one-click client traffic separation for higher security and performance - Automatically reboots your dropped or unresponsive PoE-powered devices with PoE Auto Recovery - Plug and play with no configuration required Specifications HARDWARE FEATURES - Interface * 16× 10/100/1000Mbps RJ45 Ports * AUTO Negotiation * AUTO MDI/MDIX - Network Media * 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) * EIA/TIA-568 100? STP (maximum 100m) * 100BASE-TX: UTP category 5, 5e cable (maximum 100m) * EIA/TIA-568 100? STP (maximum 100m) * 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) * EIA/TIA-568 100? STP (maximum 100m) - Fan Quantity: Fanless - External Power Supply: External Power Adapter (Output: 53.5 VDC / 2.43 A) - Packet Forwarding Rate: 23.8 Mpps - PoE Ports (RJ45) * Standard: 802.3 af/at compliant * PoE Ports: Ports 1–16 * Power Supply: 120 W - Mac Address Table: 8K, Auto-learning, Auto-aging - Switching Capacity: 32 Gbps - Dimensions ( W x D x H ): 11.3 × 4.4 × 1.0 in (286 × 111.7 × 25.4 mm) - Max Power Consumption * 11.72 W (220 V / 50 Hz no PD connected) /11.56 W (110 V / 60 Hz no PD connected) * 142.51 W (220 V / 50 Hz with 120 W* PD connected) /144.28 W (110 V / 60 Hz with 120 W* PD connected) - Max Heat Dissipation * 39.85 BTU/h (220 V / 50 Hz no PD connected) /39.31 BTU/h (110 V / 60 Hz no PD connected) * 484.53 BTU/h (220 V / 50 Hz with 120 W* PD connected) /490.55 BTU/h (110 V / 60 Hz with 120 W* PD connected) SOFTWARE FEATURES - Advanced Features * Compatible With IEEE 802.3af/at Compliant PDs * Extend Mode Button (Ports 1–4, Up to 250 m PoE power supply and data transmission) * Priority Mode Button (Ports 1–4) * Isolation Mode Button (Ports 1–7 / 8-14) * PoE Auto Recovery (Ports 1-16) * Mac Address Auto-Learning And Auto-Aging * IEEE 802.3x Flow Control * 802.1p/DSCP QoS * IGMP Snooping - Transfer Method: Store-And-Forward OTHERS - Certification: FCC, CE, RoHS - Package Contents * TL-SG116P * Power Adapter * Installation Guide - Environment * Operating Temperature: 0–40 ? (32–104 ?); * Storage Temperature: -40–70 ? (-40–158 ?) * Operating Humidity: 10–90% RH non-condensing * Storage Humidity: 5–90% RH non-condensing

CENTRALIZED POWER MANAGEMENT FOR GIGABIT ETHERNET PoE NETWORKING - To facilitate high power PoE network applications with Gigabit speed transmission, the GSW-1600HP 16-Port Gigabit High Power over Ethernet Switch features high performance Gigabit IEEE 802.3af PoE (Up to 15.4W) and IEEE 802.3at HighPower PoE (Up to 30.8W) capabilities on all ports - By offering reliable switching technology and advanced networking features, the GSW-1600HP optimizes the installation and power management of network devices such as wireless access points (AP), VoIP phones, and security video cameras - It also eliminates time and cost of deployment by integrating power and data switching into one unit, and freeing network devices from restrictions of power outlet locations and the additional AC wiring Features INTERFACE - 16-Port 10/100/1000Mbps Gigabit Ethernet RJ-45 ports - Each port supports 52V DC power to PoE Powered Device POWER OVER ETHERNET - Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet - Up to 16 IEEE 802.3af / IEEE 802.3at devices powered - Supports PoE Power up to 30 Watts for each PoE port - Auto detect powered device (PD) - Circuit protection prevents power interference between ports - Remote power feeding up to 100m SWITCHING - Hardware based 10/100/1000Mbps Auto-Negotiation and Auto MDI/MDI-X - Flow control for Full Duplex operation and back pressure for Half Duplex operation - Integrates address look-up engine, supporting 8K absolute MAC addresses - 9K Jumbo Frame supports at all speed (10/100/1000Mbps) - Automatic address learning and address aging - Supports Pre-Energy-Efficient Ethernet (EEE) function (IEEE 802.3az) HARDWARE - 19-inch desktop size, 1U height - LED indicators for PoE ready and PoE activity - Ethernet Link Energy-Saving technology - Link down power saving - Intelligent scales power based on cable length Specifications HARDWARE SPECIFICATION - Network Port: 16× 10/100/1000Base-T Auto-MDI/MDI-X RJ-45 ports - PoE Inject Port: 16-Port with 802.3af / 802.3at PoE injector function - LED Display: * System: Power (Green) * PoE Ethernet Interfaces: PoE In-Use (Orange) * 10/100/1000Base-T Ports: 1000 (LNK/ACT, Green), 10/100 (LNK/ACT, Orange) - Switch Architecture: Store and Forward switch architecture - MAC Address: 8K MAC address table with Auto learning function - Switch Fabric: 32Gbps - Switch Throughput: 23.8Mpps@64Bytes - Jumbo Packet Size: 9K Bytes - Flow Control: Back pressure for Half-Duplex. IEEE 802.3x Pause Frame for Full-Duplex - Power Requirement: AC 100-240V, 50/60Hz, 3.5A max. - Power Consumption: Max. 260 Watts / 885 BTU - Dimension (W×D×H): 445×207×45 mm (1U height) - Weight: 2.54 kg POWER OVER ETHERNET - PoE Standard: * IEEE 802.3af Power over Ethernet / PSE * IEEE 802.3at Enhancement Power over Ethernet / PSE - PoE Power Output: * Per Port 52V DC, 300mA. Max. 15.4 Watts (IEEE 802.3af) * Per Port 52V DC, 590mA. Max. 30 Watts (IEEE 802.3at) - PoE Power Budget: 220 Watts - Number of PD, 7 Watts: 16 - Number of PD, 15.4 Watts: 14 - Number of PD, 30.8 Watts: 7 STANDARD COMPLIANCE - IEEE 802.3: Ethernet - IEEE 802.3u: Fast Ethernet - IEEE 802.3x: Flow Control - IEEE 802.3af: Power over Ethernet - IEEE 802.3at: Enhancement Power over Ethernet - IEEE 802.3az: Pre-Energy-Efficient Ethernet - Regulation Compliance: FCC Class A, CE ENVIRONMENT - Operating environment: 0 to 50 Degree C - Storage environment: -40 to 70 Degree C - Operating Humidity: 5% - 95%, relative humidity, non-condensing - Storage Humidity: 5% - 95%, relative humidity, non-condensing

- 150 W PoE Budget: 8× 802.3at/af-compliant PoE+ ports with a total power supply of 150 W - Full Gigabit Ports: 8× gigabit PoE+ ports and 2× gigabit SFP Slots provide high-speed connections - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring - Centralized Management: Cloud access and Omada app for ultra convenience and easy management - Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm Control, DHCP Snooping, 802.1X, Radius Authentication, and more - Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping Specifications HARDWARE FEATURES - Standards and Protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p - Interface: * 8× 10/100/1000 Mbps RJ45 Ports, all supporting PoE+ (Auto-Negotiation/Auto MDI/MDIX) * 2× 100/1000 Mbps SFP Slots - Network Media: * 10BASE-T: UTP/STP category 3, 4, 5 cable (maximum 100m) * 100BASE-TX/1000Base-T: UTP/STP category 5, 5e or above cable (maximum 100m) * 100BASE-FX: MMF, SMF * 1000BASE-X: MMF, SMF - Fan Quantity: 1 - Physical Security Lock: Yes - PoE+ Ports(RJ45): * Standard: 802.3at/af compliant * PoE+ Ports: 8 Ports * Power Supply: 150 W - Dimensions (W×D×H): 294×180×44 mm - Mounting: Rackmount/Desktop - Max Power Consumption: * 12.2 W (110 V / 60 Hz with no PD connected) * 173.9 W (110 V / 60 Hz with 150 W PD connected) - Max Heat Dissipation: * 41.63 BTU/h (with no PD connected) * 539.35 BTU/h (with 150 W PD connected) PERFORMANCE - Switching Capacity: 20 Gbps - Packet Forwarding Rate: 14.9 Mpps - MAC Address Table: 8K - Packet Buffer Memory: 4.1 Mbit - Jumbo Frame: 9 KB SOFTWARE FEATURES - Quality of Service: * 802.1p CoS/DSCP priority * 8 priority queues * Priority Schedule Mode (SP (Strict Priority), WRR (Weighted Round Robin) * Queue Weight Config * Bandwidth Control (Port/Flow based Rating Limit) * Smoother Performance * Storm Control (Multiple Control Modes(kbps/ratio), Broadcast/Multicast/Unknown-Unicast Control) - L2 and L2+ Features: * DHCP Relay * DHCP VLAN Relay * DHCP L2 Relay * Link Aggregation (Static link aggregation, 802.3ad LACP, Up to 8 aggregation groups and up to 8 ports per group) * Spanning Tree Protocol (802.1D STP, 802.1w RSTP, 802.1s MSTP, STP Security: TC Protect, BPDU Filter/Protect, Root Protect) * Loopback Detection * Flow Control (802.3x Flow Control) * Mirroring (Port Mirroring, CPU Mirroring, One-to-One, Many-to-One, Flow-Based, Ingress/Egress/Both) * Device Link Detect Protocol (DLDP) * 802.1ab LLDP/ LLDP-MED - L2 Multicast: * 511 IPv4, IPv6 shared multicast groups * IGMP Snooping (IGMP v1/v2/v3 Snooping, Fast Leave, IGMP Snooping Querier, Static Group Config) * Multicast VLAN Registration (MVR) * Multicast Filtering * MLD Snooping (MLD v1/v2 Snooping, Fast Leave, MLD Snooping Querier, Static Group Config) * Limited IP Multicast (256 profiles and 16 entries per profile) - IPv6 Support: * IPv6 Dual IPv4/IPv6 * Multicast Listener Discovery (MLD) Snooping * IPv6 neighbor discovery (ND) * Path maximum transmission unit (MTU) discovery * Internet Control Message Protocol (ICMP) version 6 * TCPv6/UDPv6 * IPv6 applications (DHCPv6 Client, Ping6, Tracert6, Telnet (v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP) - VLAN: * VLAN Group (Max. 4K VLAN Groups) * 802.1Q tag VLAN * MAC VLAN * Protocol VLAN * GVRP * Voice VLAN - Access Control List: * Support up to 230 entries * Time-Range (Time Slice, Week Time-Range, Absolute Time-Range, Holiday) * Time-based ACL * MAC ACL (Source MAC, Destination MAC, VLAN ID, User Priority, Ether Type) * IP ACL (Source IP, Destination IP, IP Protocol, TCP Flag, TCP/UDP Source Port, TCP/UDP Destination Port, DSCP/IP TOS) * IPv6 ACL * Combined ACL * Rule Operation (Permit/Deny) * Policy Action (Mirror, Rate Limit, Redirect, QoS Remark) * ACL Rules Binding (Port Binding, VLAN Binding) * Actions for flows (Mirror (to supported interface), Redirect (to supported interface), Rate Limit, QoS Remark) - Security: * AAA * 802.1X (Port based authentication, MAC (Host) based authentication, Authentication Method includes PAP/EAP-MD5, MAB, Guest VLAN, Support Radius authentication and accountability) * IP/IPv6-MAC Binding (512 Binding Entries, DHCP Snooping, DHCPv6 Snooping, ARP Inspection, ND Detection) * IP Source Guard (253 Entries, Source IP+Source MAC) * IPv6 Source Guard (183 Entries, Source IPv6 Address+Source MAC) * DoS Defend * Static/Dynamic/Permanent Port Security (Up to 64 MAC addresses per port) * Broadcast/Multicast/Unicast Storm Control (kbps/ratio control mode) * Port Isolation * Secure web management through HTTPS with SSLv3/TLS 1.2 * Secure Command Line Interface (CLI) management with SSHv1/SSHv2 * IP/Port/MAC based access control - MIBs: * MIB II (RFC1213) * Bridge MIB (RFC1493) * P/Q-Bridge MIB (RFC2674) * Radius Accounting Client MIB (RFC2620) * Radius Authentication Client MIB (RFC2618) * Remote Ping, Traceroute MIB (RFC2925) * Support TP-Link private MIBs • RMON MIB(RFC1757, rmon 1,2,3,9) MANAGEMENT - Omada App: Yes - Centralized Management: * Omada Cloud-Based Controller * Omada Hardware Controller (OC300) * Omada Hardware Controller (OC200) * Omada Software Controller - Cloud Access: Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller) - Management Features: * Web-based GUI * Command Line Interface (CLI) through telnet * SNMPv1/v2c/v3 * SNMP Trap/Inform * RMON (1,2,3,9 groups) * SDM Template * DHCP/BOOTP Client * Dual Image, Dual Configuration * CPU Monitoring * Cable Diagnostics * EEE * SNTP * System Log OTHERS - Certification: CE, FCC, RoHS - Package Contents: TL-SG2210MP, Power Cord, Installation Guide, Rackmount Kit, Rubber Feet - System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 7/8/10, MAC OS, NetWare, UNIX or Linux - Environment: * Operating Temperature: 0C to 50C (32F to 122F) * Storage Temperature: -40C to 70C (-40F to 158F) * Operating Humidity: 10% - 90% RH non-condensing * Storage Humidity: 5% - 90% RH non-condensing

- A home network setup doesnt have to be a compromise - This compact and quiet switch is packing some serious server room grade features: a pair of 10G SFP+ cages, 512 MB of RAM, 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall, NAT and even some VPN - And it is extremely affordable – we are keeping the price on par with the previous generation desktop switches - Like many other MikroTik switches, CRS326-24G-2S+IN offers the dual boot option that allows you to use either the lightweight SwOS or the advanced RouterOS - The compact and quiet fanless desktop case makes this switch the perfect addition to the best home setups - And it is very easy to transport! But make no mistake - this small switch has all the power and features of its bigger rackmount analogue - the CRS326-24G-2S+RM, nothing has been removed - CRS326-24G-2S+IN provides all the basic functionality for a managed switch, and even more: port-to- port forwarding, MAC filtering, VLAN configuration, traffic mirroring, bandwidth limitation and even adjust some MAC and IP header fields - SFP+ cage supports both 1.25G SFP and 10G SFP+ modules Specifications - Architecture: ARM 32bit - CPU: 98DX3236 - CPU core count: 1 - CPU nominal frequency: 800 MHz - Dimensions: 285×144×44 mm - License level: 5 - Operating System: RouterOS / SwitchOS - Size of RAM: 512 MB - Storage size: 16 MB - Storage type: FLASH - Tested ambient temperature: -40C to 60C POWERING - PoE in: Passive PoE - PoE in input Voltage: 10-30 V - Number of DC inputs: 2 (PoE-IN, DC jack) - DC jack input Voltage: 10-30 V - Max power consumption: 21 W - FAN count: Passive ETHERNET - 10/100/1000 Ethernet ports: 24 FIBER - SFP+ ports: 2 PERIPHERALS - Serial port: RJ45 CERTIFICATIONS APPROVALS - Certification: CE, EAC, ROHS INCLUDED PARTS - 24V/1.2A power adapter

Features - Full Gigabit Ports: 24× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring - Centralized Management: Cloud access and Omada app for ultra convenience and easy management - Static Routing: Helps route internal traffic for more efficient use of network resources - Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more - Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping - Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities Specifications HARDWARE FEATURES - Interface: * 24× 10/100/1000 Mbps RJ45 Ports * 4× Gigabit SFP Slots * 1× RJ45 Console Port * 1× Micro-USB Console Port - Fan Quantity: Fanless - Power Supply: 100 - 240V AC, 50/60 Hz - Dimensions (W×D×H): 440×180×44 mm - Mounting: Rack Mountable - Max Power Consumption: 19.9 W (220 V/50 Hz) - Max Heat Dissipation: 67.73 BTU/h (220 V/50 Hz) PERFORMANCE - Switching Capacity: 56 Gbps - Packet Forwarding Rate: 41.66 Mpps - MAC Address Table: 16K - Jumbo Frame: 9 KB SOFTWARE FEATURES - Quality of Service: * 8 priority queues * 802.1p CoS/DSCP priority * Queue scheduling (SP (Strict Priority), WRR (Weighted Round Robin), SP+WRR) * Bandwidth Control (Port/Flow based Rating Limiting) * Smoother Performance * Action for Flows (Mirror (to supported interface), Redirect (to supported interface), Rate Limit, QoS Remark) - L2 and L2+ Features: * Link Aggregation (Static link aggregation, 802.3ad LACP, Up to 8 aggregation groups and up to 8 ports per group) * Spanning Tree Protocol (802.1d STP, 802.1w RSTP, 802.1s MSTP, STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect) * Loopback Detection (Port-based, VLAN based) * Flow Control (802.3x Flow Control, HOL Blocking Prevention) * Mirroring (Port Mirroring, CPU Mirroring, One-to-One, Many-to-One, Tx/Rx/Both) - L2 Multicast; * Supports 511 (IPv4, IPv6) IGMP groups * IGMP Snooping (IGMP v1/v2/v3 Snooping, Fast Leave, IGMP Snooping Querier, IGMP Authentication) * IGMP Authentication * MVR * MLD Snooping (MLD v1/v2 Snooping, Fast Leave, MLD Snooping Querier, Static Group Config, Limited IP Multicast) * Multicast Filtering: 256 profiles and 16 entries per profile - VLAN: * VLAN Group (Max 4K VLAN Groups) * 802.1q Tagged VLAN * MAC VLAN: 30 Entries * Protocol VLAN: Protocol Template 16, Protocol VLAN 16 * GVRP * VLAN VPN (QinQ) (Port-Based QinQ, Selective QinQ) * Voice VLAN - Access Control List: * Time-based ACL * MAC ACL (Source MAC, Destination MAC, VLAN ID, User Priority, Ether Type) * IP ACL (Source IP, Destination IP, Fragment, IP Protocol, TCP Flag, TCP/UDP Port, DSCP/IP TOS, User Priority) * Combined ACL * Packet Content ACL * IPv6 ACL * Policy (Mirroring, Redirect, Rate Limit, QoS Remark) * ACL apply to Port/VLAN - Security: * IP-MAC-Port Binding (DHCP Snooping, ARP Inspection, IPv4 Source Guard) * IPv6-MAC-Port Binding (DHCPv6 Snooping, ND Detection, IPv6 Source Guard) * DoS Defend * Static/Dynamic Port Security (Up to 64 MAC addresses per port) * Broadcast/Multicast/Unicast Storm Control (kbps/ratio/pps control mode) * IP/Port/MAC based access control * 802.1X (Port based authentication, Mac based authentication, VLAN Assignment, MAB, Guest VLAN, Support Radius authentication and accountability) * AAA (including TACACS+) * Port Isolation * Secure web management through HTTPS with SSLv3/TLS 1.2 * Secure Command Line Interface (CLI) management with SSHv1/SSHv2 - IPv6: * IPv6 Dual IPv4/IPv6 * Multicast Listener Discovery (MLD) Snooping * IPv6 ACL * IPv6 Interface * Static IPv6 Routing * IPv6 neighbor discovery (ND) * Path maximum transmission unit (MTU) discovery * Internet Control Message Protocol (ICMP) version 6 * TCPv6/UDPv6 * IPv6 applications (DHCPv6 Client, Ping6, Tracert6, Telnet (v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP) - L3 Features: * 16 IPv4/IPv6 Interfaces * Static Routing (48 static routes) * Static ARP * 512 ARP Entries * Proxy ARP * Gratuitous ARP * DHCP Server * DHCP Relay * DHCP L2 Relay - Management: * Web-based GUI * Command Line Interface (CLI) through console port, telnet * SNMPv1/v2c/v3 (Trap/Inform, RMON (1, 2, 3, 9 groups)) * SDM Template * DHCP/BOOTP Client * 802.1ab LLDP/LLDP-MED * DHCP AutoInstall * Dual Image, Dual Configuration * CPU Monitoring * Cable Diagnostics * EEE * Password Recovery * SNTP * System Log - Advanced Features: * Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller * Automatic Device Discovery * Batch Configuration * Batch Firmware Upgrading * Intelligent Network Monitoring * Abnormal Event Warnings * Unified Configuration * Reboot Schedule * ZTP (Zero-Touch Provisioning) OTHERS - Certification: CE, FCC, RoHS - Package Contents: TL-SG3428 Switch, Power Cord, Quick Installation Guide, Rackmount Kit, Rubber Feet - Environment: * Operating Temperature: 0C to 45C (32F to 113F) * Storage Temperature: -40C to 70C (-40F to 158F) * Operating Humidity: 10% - 90% RH non-condensing * Storage Humidity: 5% - 90% RH non-condensing

- CRS112-8P-4S-IN is an eight Gigabit RJ45 port PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps - CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box - There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately) - CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices) - Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V - Total limit is 2.8A@24V and 1.4A@48-57V Specifications - Architecture: MIPSBE - CPU: QCA8511 - CPU core count: 1 -CPU nominal frequency: 400 MHz - License level: 5 - Size of RAM: 128 MB - Storage size: 16 MB - Storage type: FLASH POWERING - Max Power consumption: 10W - PoE out: 802.3af/at - Number of DC inputs: 2 (DC jack) - DC jack input Voltage: 18 - 57 V ETHERNET - 10/100/1000 Ethernet ports: 8 FIBER - SFP ports: 4 PERIPHERALS - Serial port: RJ45 OTHER - PCB temperature monitor: Yes INCLUDED PARTS - IEC cord - 28V 3.4A power adapter - K48 screw kit - Ears

- SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! - It has "Dual boot" feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS - If you prefer to have a simplified switch only OS with more switch specific features, use SwOS - If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS - You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings - It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields - SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules Specification - 10/100/1000 Ethernet ports: 24 - CPU: 98DX3236A1-BTD4C000 - CPU core count: 1 - CPU nominal frequency: 800 MHz - Dimensions: 440×144×44 mm - License level: 5 - Max Power consumption: 24W - Operating System: RouterOS / SwitchOS - PoE in: Passive PoE - Power Jack: 1 - SFP+ ports: 2 - Serial port: RJ45 - Size of RAM: 512 MB - Storage size: 16 MB - Storage type: FLASH - Supported input voltage: 10 V - 30 V - Tested ambient temperature: -40C to +60C - Included parts: 24V / 1.2A power adapter, Rack ears

- Take advantage of the blazing fast 2.5/10 Gigabit combo and upgrade your workspace! This switch can utilize the full potential of RouterOS v7: run VLANs, Jumbo frames, link aggregation, ACL rules, and so much more! - The world of networking is on the move. Even small offices are shifting from Gigabit connections to the lightning-fast realm of 2.5 Gigabit connectivity. With CRS310-8G+2S+IN, we aim to give you the tools to outpace your competition with a strong combination of eight 2.5 Gigabit Ethernet ports and two 10 Gigabit SFP+ ports in a compact, powerful package! Furthermore, these SFP+ cages support multiple data rates: 1G, 2.5G, and 10G. So you can use this switch as a 10x 2.5G switch, if needed. Classic MikroTik flexibility! - The amazing Marvell 98DX226S switch-chip and integrated dual-core ARM CPU can handle the full potential of RouterOS v7. Run VLANs, Jumbo frames, link aggregation, ACL rules, and so much more! You can even do some hardware offloaded Layer-3 routing. - There are multiple mounting options. You can easily install the CRS310-8G+2S+IN in a standard 19” rack using the provided rackmount ears. Another option is to get the RMK-2/10 accessory set, which allows you to mount two CRS310 units within the same 1U 19” rack space or mount it in a 10” rack. The choice is yours! Specifications - Product code: CRS310-8G+2S+IN - Architecture: ARM 32bit - CPU: 98DX226S - CPU core count: 2 - CPU nominal frequency: 800 MHz - Switch chip model: 98DX226S - RouterOS license: 5 - Operating System: RouterOS v7 - Size of RAM: 256 MB - Storage size: 32 MB - Storage type: FLASH - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 60°C Powering - Number of DC inputs: 1 (DC jack) - DC jack input Voltage: 18-57 V - Max power consumption: 34 W - Max power consumption without attachments: 21 W - Cooling type: 1 fan Ethernet - Number of 2.5G Ethernet ports: 8 Fiber -SFP+ ports: 2 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB type A - Max USB current (A): 1 Other - CPU temperature monitor: Yes - PCB temperature monitor: Yes Certification Approvals - Certification: CE, EAC, ROHS - IP: 20

- CSS610-8P-2S+IN is one of the most well-rounded switches on the market - It is a perfect fit for the most diverse setups: from home networks and small offices to hotels, call centers and so on - The unique combination of size, features, and price offers unbelievable scalability potential - There are two SFP+ ports for 10 Gigabit fiber connectivity and eight Gigabit Ethernet ports with 802.3af/at and passive PoE-out (you only need a single PSU to provide both) - This switch is all about nice and easy setups - The compact form-factor means easier shipping and handling, while the lightweight SwOS means easier configuration - You can even configure this switch from your web browser! - It gives you all the core functionality of a managed switch, and even more: you can manage port-to-port forwarding, broadcast storm control, apply MAC filters, configure VLANs, mirror traffic, apply bandwidth limitations, and even adjust some MAC and IP header fields - But the real blessing is the combination of SFP+ and PoE-out Ethernet ports - With this setup, you can do all kinds of things on a tight budget - CSS610 has an impressive total PoE-out budget of 140 W, so you can use even in the most intense scenarios - like hotels, conference halls, or call centers! - Use the PoE-out ports to connect the IP-phones while the SFP+ ports connect your primary server to the ISP - Or power a bunch of network cameras and instantly upload the footage to the cloud - And manage a cluster of wireless access points at the same time - Also, scalability is no longer a problem. With our pricing, you can afford a switch on every floor! - Like every toolbox needs screwdrivers and pliers, every network can use a solid PoE switch - CSS610-8P-2S+IN – a solid choice! Specifications - Operating System: SwitchOS Lite - Storage size: 64 KB - Storage type: FLASH - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 70°C POWERING - Number of AC inputs: 1 - AC input range: 100-240 - Number of DC inputs: 1 (DC jack) - DC jack input Voltage: 48-57 V - Max power consumption: 162 W - Max power consumption without attachments: 12 W - Cooling type: Passive PoE-OUT - PoE-out ports: Ether1-Ether8 - PoE out: 802.3af/at - Max out per port output (input 18-30 V): 1000 mA - Max out per port output (input 30-57 V): 625 mA - Total output power: 140 ETHERNET - 10/100/1000 Ethernet ports: 8 - Number of 1G Ethernet ports with PoE-out: 8 FIBER - SFP+ ports: 2 OTHER - CPU temperature monitor: Yes - Voltage Monitor: Yes CERTIFICATIONS APPROVALS - Certification: CE, EAC, ROHS - IP: 20 INCLUDED PARTS - Rack ears for CSS610-8G-2S+IN - K-48 fastening set - IEC cord

EASY TO USE PoE SWITCH WITH INNOVATIVE DESIGN - Up To 250m Data and Power Transmission for Surveillance HIGH PoE POWER BUDGET - TL-SL1218MP complies with the 802.3af/at PoE+ standard, supporting up to 30W power supply on each PoE port - The total high PoE power budget of up to 192W for the 16 PoE ports, making it ideal for small to medium business surveillance systems UP TO 250m TRANSMISSION FOR SURVEILLANCE - TL-SL1218MP is a special designed PoE switch for IP surveillance applications - PoE switch makes surveillance installation simpler, safer and less expensive - With the extend mode, the PoE transmission distance reaches up to 250m* which makes it perfect for IP Camera deployment in large area coverage VIDEO QUALITY GUARANTEED - To guarantee the quality of sensitive applications like video monitor, TL-SL12128MP offers higher priority options for those IPC connected ports Features - 16 PoE+ 10/100Mbps RJ45 ports, 2 Gigabit RJ45 ports and 2 combo Gigabit SFP slots - Up to 250m data and power transmission under extend mode specially designed for surveillance system - Priority mode for port1-8 to guarantees the quality of sensitive applications like video monitor - High PoE power budget with up to 30W for each PoE port and 194W for all PoE ports - Easy to use, with no configuration and installation needed Specificationsy HARDWARE FEATURES - Interface: * 16× PoE+ 10/100Mbps RJ45 Ports * 2× 10/100/1000Mbps RJ45 Ports * 2× Combo Gigabit SFP Slots - Network Media: * 10BASE-T: UTP category 3, 4, 5 cable (max. 100m) ** EIA/TIA-568 100Ohm STP (max.100m) * 100BASE-TX: UTP category 5, 5e cable (max. 100m) ** EIA/TIA-568 100Ohm STP (max. 100m) * 1000BASE-T: UTP category 5, 5e, 6 or above cable (max. 100m) ** EIA/TIA-568 100Ohm STP (max. 100m) * 1000BASE-X MMF, SMF - Fan Quantity: 2 Fans - Power Supply: 100-240V AC, 50/60 Hz - Backup Bandwidth: 7.2 Gbps - PoE+ Ports(RJ45): * Standard: 802.3at/802.3af compliant * PoE Ports: Port1- Port16 * PoE Power Budget: 192W - Mac Address Table: 8K - Dimensions (W×D×H): 440×180×44 mm - Max Power Consumption: * 18.73 W (220/50Hz. no PD connected) * 217.22 W (220/50Hz with 192W PD connected) - Max Heat Dissipation: * 63.89 BTU/h (no PD connected) * 741.15 BTU/h (with 192W PD connected) SOFTWARE FEATURES - Advanced Features: * Compatible With IEEE 802.3at/af Compliant PDs * Port Priority Mode * Extend Mode (Up to 250m PoE power supply and data transmission) * Mac Address Auto-Learning And Auto-Aging * IEEE802.3x Flow Control - Transmission Method: Store-And-Forward OTHERS - Certification: CE, FCC, RoHS - Package Contents: TL-SL1218MP, Power Cable, Installation Guide, Two mounting brackets and the fittings - Environment: * Operating Temperature: 0C - 40C (32F - 104F) * Storage Temperature: -40C - 70C (-40F - 158F) * Operating Humidity: 10% - 90% non-condensing * Storage Humidity: 5% - 90% non-condensing

Ubiquiti UniFi Switch 24 is a fully managed Layer 2 switch with (24) Gigabit Ethernet ports and (2) Gigabit SFP ports for fiber connectivity

- 16 10/100/1000Mbps RJ45 PoE+ Ports Switch with 2 SFP Slots - PoE power budget is up to 192W, making it ideal for small to medium business surveillance systems - Port Priority is able to guarantee the quality of sensitive application like video monitor - Intelligent power management can protect the switch from overload - QoS is for smooth internet-surfing experience and IGMP Snooping is capable of optimizing traffic for IPTV Specifications HARDWARE FEATURES - Standards and Protocols: * IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x * IEEE 802.3af, IEEE 802.3at, IEEE 802.1q, IEEE 802.1p - Interface: * 16× 10/100/1000 Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) * 2× Gigabit SFP Ports - Network Media: * 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) * EIA/TIA-568 100? STP (maximum 100m) * 100BASE-TX: UTP category 5, 5e cable (maximum 100m) * EIA/TIA-568 100? STP (maximum 100m) * 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) * EIA/TIA-568 100? STP (maximum 100m) * 1000BASE-X MMF, SMF - Fan Quantity: 2 Fans - Physical Security Lock: Yes - Power Supply: 100-240V AC, 50/60 Hz - PoE+ Ports(RJ45): * Standard: 802.3at/802.3af compliant * PoE+ Ports: 16 Ports * Power Supply: 192W - Dimensions (W×D×H): 440×180×44 mm - Mounting: Rack Mountable - Max Power Consumption: * 18.73 W (220/50Hz. no PD connected) * 217.22 W (220/50Hz. with 192W PD connected) - Max Heat Dissipation: * 63.89 BTU/h (no PD connected) * 741.15 BTU/h (with 192W PD connected) PERFORMANCE - Switching Capacity: 36 Gbps - Packet Forwarding Rate: 23.8 Mbps - MAC Address Table: 8K - Packet Buffer Memory: 4.1 Mbit - Jumbo Frame: 9 KB SOFTWARE FEATURES - Quality of Service: * Support Port-based 802.1p/DSCP priority * Support 4 priority queues * Rate Limit * Storm Control - L2 Features: * IGMP Snooping V1/V2/V3 * Static Link Aggregation * Port Mirroring * Cable Diagnostics * Loop Prevention - VLAN: * Support up to 32 VLANs simultaneously (out of 4K VLAN IDs) * MTU/Port/Tag VLAN - Management: * Web-based GUI * Easy Smart Configuration Utility - Transmission Method: Store-And-Forward OTHERS - Certification: CE, FCC, RoHS - Package Contents: TL-SG1218MPE, Power Cord, Installation Guide, Resource CD, Rackmount Kit, Rubber Feet - Environment: * Operating Temperature: 0C - 50C (32F - 122F) * Storage Temperature: -40C - 70C (-40F - 158F) * Operating Humidity: 10% - 90% non-condensing * Storage Humidity: 5% - 90% non-condensing

Hardware Specifications - 10/100/1000BASE-T Copper Ports: 24 auto-MDI/MDI-X ports - 802.3af/802.3at PoE Injector Ports: 24 - 1000BASE-X SFP/mini-GBIC Slots: 2 - Switch Architecture: Store-and-Forward - Switch Fabric: 52Gbps/non-blocking - Switch Throughput@64 bytes: 38.6Mpps@64 bytes - MAC Address Table: 8K entries - Jumbo Frame: 9216 bytes - Flow Control: IEEE 802.3x pause frame for full-duplex; back pressure for half-duplex - LED: * System: Power (Green) * 10/100/1000T RJ45 Interfaces * 1000 LNK / ACT (Green), 10/100 LNK/ACT (Orange), PoE (Orange) * 1000Mbps SFP Interfaces * 1000 LNK / ACT (Green) - Dimensions (W×D×H): 445×207×45 mm (1U height) - Enclosure: Metal - Weight: 2.85 kg - Power Requirements: 100-240V AC, 50/60Hz, 4A (max.) - Thermal Fan: 2 Power over Ethernet - PoE Standard: * IEEE 802.3af Power over Ethernet/PSE * IEEE 802.3at Power over Ethernet Plus/PSE - PoE Power Output: * Per port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af) * Per port 52V DC, 600mA. max. 30 watts (IEEE 802.3at) - PoE Power Budget: 220 watts - Number of PDs, 7 watts: 24 - Number of PDs, 15.4 watts: 14 - Number of PDs, 30 watts: 7 Standards Conformance - Standards Compliance: IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3z Gigabit SX/LX IEEE 802.3x flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at High Power over Ethernet IEEE 802.3az Energy-Efficient Ethernet Environment - Operating: * Temperature: 0 to 50 degrees C * Relative Humidity: 5 to 95% (non-condensing) - Storage: * Temperature: -10 to 70 degrees C * Relative Humidity: 5 to 95% (non-condensing)