5-portni gigabitni switch tiha konstrukcija bez ventilatora predviđen za držati na stolu ili za montažu na zid jednostavna Plug and Play instalacija vanjsko napajanje priloženo u kutiji Garancija: 24 mjeseca

- RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports - Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only) - RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip - Device is running an operating system designed specifically for MikroTik Switch products - SwOS Specifikacija - SFP DDMI: Yes - Architecture: RISC - 10/100/1000 Ethernet ports: 5 - Power Jack: 1 - PoE out: Yes - PoE in: Yes - Supported input voltage: 8 V - 30 V - Voltage Monitor: Yes - PCB temperature monitor: Yes - Dimensions: 113x139x28mm - Operating System: MikroTik SwOS - Tested ambient temperature: -25? to +65? - SFP ports: 1 - Storage type: FLASH - Storage size: 128 KB

Features - Supports PoE power up to 15.4W for each PoE port - Supports PoE power up to 53W for all PoE ports - Supports PoE IEEE802.3af compliant PDs - Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode - 1K entry MAC address table of the TL-SF1008P with auto-learning and auto-aging - LED indicators for monitoring power, link, activity and speed - External power adapter supply Specifications HARDWARE FEATURES - Interface: 8 10/100Mbps RJ45 ports (AUTO Negotiation/AUTO MDI/MDIX) - PoE ports (RJ45): 4 - Mac Address Table: 8K - Backbound Bandwith: 1.6Gbps - LED Indicators: Power, Link/Act, 100Mbps, PoE Status, PoE MAX - Network Media: * 10BASE-T: UTP category 3, 4, 5 cable (max. 100 m) * EIA/TIA-568 100 Ohm STP (max. 100 m) * 100BASE-TX: UTP category 5, 5e cable (max. 100 m) * EIA/TIA-568 100 Ohm STP (max. 100 m) - External Power Supply: External Power Adapter(Output: 48VDC / 1.25A) - Dimensions (W×D×H): 171×98×27 mm SOFTWARE FEATURES - Transmission Method: Store-And-Forward - Advanced Functions: * Compatible With Ieee 802.3af * Compliant Pds * Priority Function * Mac Address Auto-Learning And Auto-Aging * IEEE802.3x Flow Control For * Full-Duplex Mode * Backpressure For Half-Duplex Mode OTHER FEATURES - Consumption: * 5.8W (max. no PD connected) * 58W (max. with 53w PD connected) - Operating Temperature: 0C - 40C (32F - 104F) - Storage Temperature: -40C - 70C (-40F - 158F) - Operating Humidity: 10-90% non-condensing - Storage Humidity: 5-90% non-condensing

- The Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages - The package includes a power supply - Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power Specification - CPU nominal frequency: 400 MHz - CPU core count: 1 - Size of RAM: 128 MB - 10/100/1000 Ethernet ports: 1 - Power Jack: 1 - PoE in: Yes - Supported input voltage: 11 V - 30 V - Dimensions: 114×137×29 mm - Operating System: RouterOS - License level: 5 - CPU: QCA8511 - Max Power consumption: 11W - SFP ports: 6 - Serial port: RJ45 - Storage type: FLASH - Storage size: 16 MB - Included parts: 24V 0.8A power adapter

Features - Five 10/100/1000Mbps RJ45 ports - Equipped with four 802.3af/at PoE+ ports with up to 30W for each port, data, and power can be transferred on one single cable - Supports PoE power up to 65 W for all PoE ports - Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery - Simple network set-up on top of plug-and-play connectivity - Web-based user interface and Easy Smart Configuration Utility simplify configuration - Fanless design lowers energy consumption and eliminates operating noise Specifications HARDWARE FEATURES - Standards and Protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, IEEE 802.3at - Interface: 5× 10/100/1000Mbps RJ45 Ports, AUTO Negotiation/AUTO MDI/MDIX - Network Media: * 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) * EIA/TIA-568 100 Ohm STP (maximum 100m) * 100BASE-TX: UTP category 5, 5e cable (maximum 100m) * EIA/TIA-568 100 Ohm STP (maximum 100m) * 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) * EIA/TIA-568 100 Ohm STP (maximum 100m) - Fan Quantity: Fanless - Power Supply: External Power Adapter (Output: 53.5 VDC/1.31 A) - PoE Ports (RJ45) * Standard: 802.3 af/at compliant * PoE Ports: Port 1- Port 4 * PoE Power Budget: 65 W - Dimensions (W×D×H): 99.8×98×25 mm - Max Power Consumption: * 4.52 W (220V/50Hz with no PD connected) * 75.16 W (220V/50Hz with 65 W PD connected) - Max Heat Dissipation: * 15.41 BTU/h (with no PD connected) * 256.30 BTU/h (with 65 W PD connected) PERFORMANCE - Switching Capacity: 10 Gbps - Packet Forwarding Rate: 7.44 Mpps - MAC Address Table: 2 K - Packet Buffer Memory: 1.5 Mb - Jumbo Frame: 16 KB SOFTWARE FEATURES - Quality of Service: * Support Port-Based/802.1p/DSCP priority * Support 4 priority queues * Rate Limit * Storm Control - L2 Features: * IGMP Snooping V1/V2/V3 * Static Link Aggregation * Port Mirroring * Cable Diagnostics * Loop Prevention * PoE Auto Recovery * Extend Mode - VLAN: * Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs) * MTU/Port/Tag VLAN - Management: Web-based GUI, Easy Smart Configuration Utility - Transmission Method: Store-And-Forward OTHERS - Certification: FCC, CE, RoHS - Package Contents: TL-SG105PE, Power Adapter, Installation Guide, Rbber Feet - System Requirements: Microsoft Windows for running Utility - Environment: * Operating Temperature: 0C to 40C (32F to 104F) * Storage Temperature: -40C to 70C (-40F to 158F) * Operating Humidity: 10% - 90% RH non-condensing * Storage Humidity: 5% - 95% RH non-condensing

TP-Link 16-Port Gigabit Desktop/Rackmount Switch, 16 10/100/1000M RJ45 ports, 1U 13-inch rack-mountable steel case, energy-efficient technology, supports MAC address self-learning, Auto MDI/MDIX and Auto negotiation, Jumbo Frame support

Key Features RJ45 INTERFACE - 6× 10/100/1000Mbps Gigabit Ethernet ports - 4× ports support 54V DC power to PoE powered device POWER OVER ETHERNET - Complies with IEEE 802.3af/at Power over Ethernet end-span PSE - Up to 4 IEEE 802.3af/at devices powered - Supports PoE power up to 30 watts for each PoE port - 55-watt PoE budget - Auto detects powered device (PD) - Circuit protection prevents power interference between ports - Remote power feeding up to 100m SWITCHING - Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X - Flow control for full duplex operation and back pressure for half duplex operation - 9216 bytes jumbo packet size support - Integrates address look-up engine, supporting 8K absolute MAC addresses - Automatic address learning and address aging - Supports port-based VLAN and loop protection HARDWARE - LED indicators for PoE ready and LINK/ACT - One 55V DC power jack Specifications HARDWARE SPECIFICATIONS - Network Connector: 6-port RJ45 for 10/100/1000BASE-T, auto MDI / MDIX - PoE Inject Port: 4-port with 802.3af/at PoE injector function (port 1 to port 4) - LED Display: * System: Power (Green) * Per PoE port: PoE (Orange, port 1 to port 4), PoE max. (Orange) * Ethernet port: 1000 LNK (Green), 10/100 LNK (Orange) - Thermal Fan: Fanless design - Switch Architecture: Store and Forward switch architecture - MAC Address Table: 8K MAC address table with auto learning function - Switch Fabric: 12Gbps - Switch Throughput: 8.92Mpps @64 bytes - Jumbo Packet: 9216 bytes - Flow Control: * Back pressure for half-duplex * IEEE 802.3x pause frame for full-duplex - Power Requirements: 55V DC, 1.1A - ESD Protection: 6kV DC - Power Consumption: Max. 60 watts, 204.6 BTU - Dimensions (W×D×H): 160×92.5×28 mm - Weight: 374 g POWER OVER ETHERNET - PoE Standard: * IEEE 802.3af Power over Ethernet/PSE * IEEE 802.3at Power over Ethernet Plus/PSE - PoE Power Supply Type: End-span - Power Pin Assignment: 1/2(+), 3/6(-) - PoE Power Output: * Per port 54V DC, 300mA. max. 15.4 watts (IEEE 802.3af) * Per port 54V DC, 600mA. max. 30 watts (IEEE 802.3at) - PoE Power Budget: 55 watts STANDARD CONFORMANCE - EMI Safety: FCC Class B, CE - Standard Compliance: * IEEE 802.3 Ethernet * IEEE 802.3u Fast Ethernet * IEEE 802.3ab Gigabit Ethernet * IEEE 802.3x Flow Control * IEEE 802.3af Power over Ethernet * IEEE 802.3at Power over Ethernet Plus ENVIRONMENT - Operating Environment: 0 to 50 degrees C - Storage Environment: -10 to 70 degrees C - Operating Humidity: 5% - 95%, relative humidity, non-condensing - Storage Humidity: 5% - 95%, relative humidity, non-condensing

Switch TP-LINK TL-SG1016 (16 x 1000/100/10Mbps, Rackmount, Auto-Negotiation, MDI/MDI-X switch)

TP-Link 16-Port Gigabit Easy Smart Switch, 16-Port Gigabit Easy Smart Switch, AUTO Negot./AUTO MDI/MDIX, IGMP Snooping, MTU/Port/Tag VLAN

- 8 10/100/1000Mbps RJ45 ports - Equipped with 4 × 802.3af PoE+ ports with up to 30W for each port, data and power can be transferred on one single cable - Supports PoE power up to 64W for all PoE ports - Provides network monitoring, traffic prioritization and VLAN features - Simple network set-up on top of plug-and-play connectivity - Web-based user interface and Easy Smart Configuration Utility simplify configuration Specifications HARDWARE FEATURES - Standards and Protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p - Interface: * 8× 10/100/1000Mbps RJ45 Ports * AUTO Negotiation/AUTO MDI/MDIX - Network Media: * 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) * EIA/TIA-568 100Ohm STP (maximum 100m) * 100BASE-TX: UTP category 5, 5e cable (maximum 100m) * EIA/TIA-568 100Ohm STP (maximum 100m) * 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) * EIA/TIA-568 100Ohm STP (maximum 100m) - Fan Quantity: Fanless - Power Supply: External Power Adapter(Output: 53.5 VDC/1.31 A) - PoE Ports (RJ45): * tandard: 802.3 af compliant * PoE Ports: Port 1- Port 4 * PoE Power Budget: 64W - Max Power Consumption: * 5.41W (220V/50Hz with no PD connected) * 74.27W (220V/50Hz with 64W PD connected) - Max Heat Dissipation: * 18.45 BTU/h (with no PD connected) * 253.26 BTU/h (with 64W PD connected) PERFORMANCE - Switching Capacity: 16Gbps - Packet Forwarding Rate: 11.9Mpps - MAC Address Table: 4K - Packet Buffer Memory: 1.5Mb - Jumbo Frame: 15KB SOFTWARE FEATURES - Quality of Service: * Support Port-Based/802.1p/DSCP priority * Support 4 priority queues * Rate Limit * Storm Control - L2 Features: * IGMP Snooping V1/V2/V3 * Static Link Aggregation * Port Mirroring * Cable Diagnostics * Loop Prevention - VLAN: * Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs) * MTU/Port/Tag VLAN - Management: Web-based GUI, Easy Smart Configuration Utility - Transmission Method: Store-And-Forward OTHERS - Certification: FCC, CE, RoHS - Package Contents: TL-SG108PE, Power Adapter, Installation Guide, Rubber Feet - System Requirements: Microsoft Windows for running Utility - Environment: * Operating Temperature: 0C - 40C (32F - 104F) * Storage Temperature: -40C - 70C (-40F - 158F) * Operating Humidity: 10% - 90%RH non-condensing * Storage Humidity: 5% - 95%RH non-condensing

16-Port Gigabit Easy Smart Switch, 16 10/100/1000Mbps RJ45 ports, MTU/Port/Tag-based VLAN, QoS, IGMP Snooping, 1U 13-inch rack-mountable steel case

Key Features - Complies with IEEE802.3, 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T - 16-Port 10/100/1000Mbps Gigabit Ethernet ports - Features Store-and-Forward mode with wire-speed filtering and forwarding rates - Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation - IEEE802.3x flow control for full duplex operation and backpressure for half duplex operation - Integrated address look-up engine, support 4K/8K absolute MAC addresses - Provide 272KB buffer memory - 9K Jumbo packet support - Automatic address learning and address aging - Supports Auto MDI/MDI-X function - Support CSMA/CD protocol - 100~240VAC, 3.0A, 50~60Hz universal Power input - FCC, CE class A compliant SPECIFICATION Hardware Specification - Network Ports: 16-Port 10/100/100Mbps RJ-45 with Auto-MDI/MDI-X - Switch Processing Scheme: Store-and-Forward - Switch fabric: 32Gbps - Throughput (packet per second): 23.8Mbps - Address Table: 8K Entries - Share data Buffer: 272KB - Flow Control: Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex - Dimension (W×H×D): 440×44×120 mm - Weight: 1.6 KG - Power Requirement: 100~240 VAC, 3.0A, 50-60 Hz - Power Consumption: 30 watts, 102BTU - Temperature * Operating: 0~50 degree C * Storage -40~70 degree - Humidity Operating: 10% to 90%, Storage: 5% to 95% (Non-condensing) Standards Conformance - Regulation Compliance: FCC Part 15 Class A, CE - Standards Compliance * IEEE 802.3 (Ethernet) * IEEE 802.3u (Fast Ethernet) * IEEE 802.3ab(Gigabit Ethernet) * IEEE 802.3x (full-duplex flow control)

Switch TP-Link TL-SG1024D 24-port Gigabit Desktop/Rachmount Switch, 24 10/100/1000M RJ45 ports, 13-inch rack-mountable steel case

D-LINK 16-Port Gigabit Unmanaged Desktop Switch

FEATURES - Complies with IEEE802.3, 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T - 24-Port 10/100/1000Mbps Gigabit Ethernet ports - Features Store-and-Forward mode with wire-speed filtering and forwarding rates - Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation - IEEE802.3x flow control for full duplex operation and Backpressure for half duplex operation - Integrated address look-up engine, support 8K absolute MAC addresses - Provide 400KB buffer memory - 9K Jumbo packet support - Automatic address learning and address aging - Supports Auto MDI/MDI-X function - Support CSMA/CD protocol - 100~240VAC, 3.0A, 50~60Hz universal Power input - FCC, CE class A compliant SPECIFICATIONS Hardware Specification - Network Ports: 24-Port 10/100/100Mbps RJ-45 with Auto-MDI/MDI-X - Switch Architecture: Store and Forward - Switch Fabric: 48Gbps - Switch Throughput: 35.7Mbps - Address Table 8K Entries: 8 entries - Share Data Buffer: 400KB - Flow Control: Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex - Dimension (W×H×D): 440×44×120 mm - Weight: 1.75 KG - Power Requirement: 100~240 VAC, 3.0A, 50-60 Hz - Power Consumption: 30 watts, 102BTU - Temperature: Operating: 0-50 degree C, Storage -40-70 degree C - Humidity Operating: 10% to 90%, Storage: 5% to 95% (Non-condensing) Standards Conformance - Regulation Compliance: FCC Part 15 Class A, CE - Standards Compliance: * IEEE 802.3 (Ethernet) * IEEE 802.3u (Fast Ethernet) * IEEE 802.3ab(Gigabit Ethernet) * IEEE 802.3x (Full-duplex flow control) - Temperature: * Operating: 0-50 Degree C * Storage: -40-70 Degree C - Humidity: * Operating: 5-90% * Storage: 5-90% (Non-condensing)

- Full Gigabit Ports: 8× gigabit RJ45 ports provide high-speed connections - Integrated into Omada SDN: Centralized Cloud Management, and Intelligent Monitoring - Centralized Management: Cloud access and Omada app for ultra convenience and easy management - Robust Security Strategies: 802.1Q VLAN, ACL, Port Security, Storm Control, and more - Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping - Versatile Management: WEB/CLI managed modes, SNMP, and RMON bring abundant management features Specifications HARDWARE FEATURES - Standards and Protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x - Interface: 8× 10/100/1000Mbps RJ45 Ports (Auto-Negotiation/Auto MDI/MDIX) - Network Media: * 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) * 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) - Fan Quantity: Fanless - Power Supply: * 12 VDC/1 A External Adapter or * Obtain Power from PoE Source - Power Consumption: 6.4 W (220 V/50 Hz) - Dimensions (W×D×H): 209×126×26 mm PERFORMANCE - Bandwidth/Backplane: 16 Gbps - Packet Forwarding Rate: 11.9 Mpps - MAC Address Table: 8K - Jumbo Frame: 9 KB SOFTWARE FEATURES - Quality of Service: * 802.1p CoS/DSCP priority * 8 priority queues * Priority Schedule Mode: SP (Strict Priority), WRR (Weighted Round Robin) * Queue Weight Config * Bandwidth Control: Port/Flow based Rating Limit * Smoother Performance * Storm Control: Multiple Control Modes(kbps/ratio), Broadcast/Multicast/Unknown-Unicast Control - L2 and L2+ Features: * 16 IP Interfaces: Support IPv4/IPv6 Interface * Static Routing: 32 IPv4/IPv6 Static Routes * DHCP Server * DHCP Relay: DHCP Interface Relay, DHCP VLAN Relay * DHCP L2 Relay * Static ARP * Proxy ARP * Gratuitous ARP * Link Aggregation: Static link aggregation, 802.3ad LACP, Up to 8 aggregation groups and up to 8 ports per group * Spanning Tree Protocol: 802.1D STP, 802.1w RSTP, 802.1s MSTP, STP Security: TC Protect, BPDU Filter/Protect, Root Protect * Loopback Detection * Flow Control: 802.3x Flow Control * Mirroring: Port Mirroring, CPU Mirroring, One-to-One, Many-to-One, Flow-Based, Ingress/Egress/Both * Device Link Detect Protocol (DLDP) * 802.1ab LLDP/ LLDP-MED - VLAN: * VLAN Group: Max. 4K VLAN Groups * 802.1Q tag VLAN * MAC VLAN: 12 Entries * Protocol VLAN * GVRP * Voice VLAN - Access Control List: * Support up to 230 entries * Time-Range: Time Slice, Week Time-Range, Absolute Time-Range, Holiday * Time-based ACL * MAC ACL: Source MAC, Destination MAC, VLAN ID, User Priority, Ether Type * IP ACL: Source IP, Destination IP, IP Protocol, TCP Flag, TCP/UDP Source Port, TCP/UDP Destination Port, DSCP/IP TOS * IPv6 ACL * Combined ACL * Rule Operation: Permit/Deny * Policy Action: Mirror, Rate Limit, Redirect, QoS Remark * ACL Rules Binding: Port Binding, VLAN Binding * Actions for flows: Mirror (to supported interface), Redirect (to supported interface), Rate Limit, QoS Remark - Security: * AAA * 802.1X: Port based authentication, MAC (Host) based authentication, Authentication Method includes PAP/EAP-MD5, MAB, Guest VLAN, Support Radius authentication and accountability * IP/IPv6-MAC Binding: 512 Binding Entries, DHCP Snooping, DHCPv6 Snooping, ARP Inspection, ND Detection * IP Source Guard: 253 Entries, Source IP+Source MAC * IPv6 Source Guard: 183 Entries, Source IPv6 Address+Source MAC * DoS Defend * Static/Dynamic/Permanent Port Security: Up to 64 MAC addresses per port * Broadcast/Multicast/Unicast Storm Control: kbps/ratio control mode * Port Isolation * Secure web management through HTTPS with SSLv3/TLS 1.2 * Secure Command Line Interface (CLI) management with SSHv1/SSHv2 * IP/Port/MAC based access control - Management: * Web-based GUI * Command Line Interface (CLI) through telnet * SNMPv1/v2c/v3 * SNMP Trap/Inform * RMON (1,2,3,9 groups) * SDM Template * DHCP/BOOTP Client * Dual Image, Dual Configuration * CPU Monitoring * Cable Diagnostics * EEE * SNTP * System Log OTHERS - Certification: CE, FCC, RoHS - Package Contents: TL-SG2008, Power Adapter, Installation Guide, Rubber Feet - System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 7, MAC OS, NetWare, UNIX or Linux - Environment: * Operating Temperature: 0C to 40C (32F to 104F) * Storage Temperature: -40C to 70C (-40F to 158F) * Operating Humidity: 10% - 90% non-condensing * Storage Humidity: 5% - 90% non-condensing

Key Features PHYSICAL PORT - 10-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper - 8-port IEEE 802.3at PoE+ Injector (Port-1 to Port-8) POWER OVER ETHERNET - Complies with IEEE 802.3at Power+ over Ethernet end-span PSE - Up to 8 ports of IEEE 802.3af/802.3at devices powered - Supports PoE power up to 30.8 watts for each PoE port - Each port supports 55V DC power to PoE powered device - 120-watt PoE budget - Auto detects powered device (PD) - Circuit protection prevents power interference between ports - Remote power feeding up to 100m in standard mode with 250m in extended mode SWITCHING - Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X - Flow control for full duplex operation and back pressure for half duplex operation - IEEE 802.1Q VLAN transparency - Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port-1 to Port-8) - Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing HARDWARE - 9-inch desktop size, 1U height, rack mountable - LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act - Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az) Specifications HARDWARE SPECIFICATIONS - Copper Port: 10 10/100/1000BASE-T MDI/MDIX Ports - PoE Injector Port: 8-port with 802.3at/af PoE injector function with Port-1 to Port-8 - Switch Architecture: Store-and-Forward - Switch Fabric: 20Gbps/non-blocking - Switch Throughput@64 bytes: 14.88Mpps@64 bytes - MAC Address Table: 8K entries, automatic source address learning and aging - Maximum Frame Size: 9K bytes - Flow Control: * IEEE 802.3x pause frame for full-duplex * Back pressure for half-duplex - LED: * System: Power (Green) * 10/100/1000BASE-T RJ45 interfaces: 10/100Mbps LNK/ACT (Red), 1000Mbps LNK/ACT (Green) * PoE interfaces: PoE-in-Use (Orange) - DIP Switch: Selectable operation mode (Standard / VLAN / Extend) - Dimensions (W×D×H): 220×150×43 mm (1U height) - Enclosure: Metal - Weight: 1260 g - Power Requirements: AC 100-240V, 50/60Hz, 2.5A max. - Power Consumption/ Dissipation: * System On: Max. 5.6 watts/19.1 BTU * Ethernet Full Loading: Max. 10.6 watts/36.1 BTU * PoE Full Loading: Max. 139 watts/474.2 BTU - ESD Protection: * Contact discharge of 4KV DC * Air discharge of 6KV DC - Thermal Fan: 1 POWER OVER ETHERNET - PoE Standard: * IEEE 802.3af Power over Ethernet/PSE * IEEE 802.3at Power over Ethernet Plus/PSE - PoE Power Supply Type: End-span - PoE Power Output: Per port 55V DC, 540mA. max. 30 watts - Power Pin Assignment: 1/2 (+), 3/6 (-) - PoE Power Budget: 120 watts - Max. Number of Class 2 PDs: 8 - Max. Number of Class 3 PDs: 8 - Max. Number of Class 4 PDs: 4 STANDARDS CONFORMANCE - Regulatory Compliance: FCC Part 15 Class A, CE - Standards Compliance: * IEEE 802.3 10BASE-T * IEEE 802.3u 100BASE-TX * IEEE 802.3ab Gigabit 1000BASE-T * IEEE 802.3x Flow control and back pressure * IEEE 802.3af Power over Ethernet * IEEE 802.3at Power over Ethernet Plus * IEEE 802.3az Energy Efficient Ethernet (EEE) ENVIRONMENT - Operating: * Temperature: 0 - 50 degrees C * Relative Humidity: 5 - 95% (non-condensing) - Storage: * Temperature: -10 - 70 degrees C * Relative Humidity: 5 - 95% (non-condensing)

- Five 10/100/1000Mbps RJ45 ports - Equipped with four 802.3af/at PoE+ ports with up to 30W for each port, data, and power can be transferred on one single cable - Supports PoE power up to 120 W for all PoE ports* - Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery - Simple network set-up on top of plug-and-play connectivity - Web-based user interface and Easy Smart Configuration Utility simplify configuration - Fanless design lowers energy consumption and eliminates operating noise Specifications HARDWARE FEATURES - Standards and Protocols • IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, • IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, IEEE 802.3at - Interface • Five 10/100/1000Mbps RJ45 Ports • AUTO Negotiation/AUTO MDI/MDIX - Network Media • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • EIA/TIA-568 100? STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m) • EIA/TIA-568 100? STP (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) • EIA/TIA-568 100? STP (maximum 100m) - Fan Quantity: Fanless - Power Supply: External Power Adapter (Output: 53.5 VDC / 2.43 A) - PoE Ports (RJ45) • Standard: 802.3 af/at compliant • PoE Ports: Port 1- Port 4 • PoE Power Budget: 120 W - Dimensions ( W x D x H ): 3.9 × 3.9 × 1.0 in (99.8 × 98 × 25 mm) - Max Power Consumption: • 4.34 W (220 V/50 Hz with no PD connected) • 137.01 W (110 V/50 Hz with 120 W PD connected) - Max Heat Dissipation • 14.8 BTU/h (with no PD connected) • 467.17 BTU/h (with 120 W PD connected) PERFORMANCE - Switching Capacity: 10 Gbps - Packet Forwarding Rate: 7.44 Mpps - MAC Address Table: 2 K - Packet Buffer Memory: 1 Mb - Jumbo Frame: 16 KB SOFTWARE FEATURES - Quality of Service • Support Port-Based/802.1p/DSCP priority • Support 4 priority queues • Rate Limit • Storm Control - L2 Features • IGMP Snooping V1/V2/V3 • Static Link Aggregation • Port Mirroring • Cable Diagnostics • Loop Prevention • PoE Auto Recovery • Extend Mode - VLAN • Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs) • MTU/Port/Tag VLAN - Management • Web-based GUI • Easy Smart Configuration Utility - Transmission Method: Store-And-Forward OTHERS - Certification: FCC, CE, RoHS - Package Contents • TL-SG105MPE • Power Adapter • Installation Guide • Rubber Feet - System Requirements: Microsoft Windows for running Utility - Environment: Operating Temperature: 0?~40? (32?~104?) - Storage Temperature: -40?~70? (-40?~158?) - Operating Humidity: 10%~90%RH non-condensing - Storage Humidity: 5%~95%RH non-condensing

Hardware Specifications - Network Connector: 9-Port RJ45 for 10/100/1000BASE-T - PoE Inject Port: 8-Port with 802.3af/802.3at PoE injector function - LED Display: * System: Power (Green), PoE Usage 100% (Green) * Per PoE port: PoE (Green), port 1 to port 8; LNK/ACT (Orange), port 1 to port 9 - Switch Architecture: Store and forward - MAC Address Table: 4K MAC address table with auto learning function - Data Buffer: 192 KB - Switch Fabric: 18Gbps - Switch Throughput: 13.3Mpps@64bytes - Flow Control: Back pressure for half duplex. IEEE 802.3x pause frame for full duplex - Power Requirements: DC 51V, 2A max. - Power Consumption: 100 watts/341BTU - Dimensions (W×D×H): 103×235×27 mm - Weight: 628 g Power over Ethernet - PoE Standard: IEEE 802.3af/802.3at Power over Ethernet PSE - PoE Power Supply Type: End-Span - PoE Power Output: * Per port 51V DC, 350mA. max. 15.4 watts * Per port 51V DC, 600mA. max. 30 watts - Power Pin Assignment: 1/2(+), 3/6(-) - PoE Power Budget: 100 watts - Max. Number of Class 2 PDs: 8 - Max. Number of Class 3 PDs: 7 - Max. Number of Class 4 PDs: 3 Standard Conformance - Standard Compliance: * EEE 802.3 * IEEE 802.3u * IEEE 802.3ab * IEEE 802.3x * IEEE 802.3af * IEEE 802.3at * Ethernet * Fast Ethernet * Gigabit Ethernet * Flow Control * Power over Ethernet * Power over Ethernet Plus Environment - Operating Environment: 0 - 50 degrees C - Storage Environment: -10 - 70 degrees C - Operating Humidity: 5-95%, relative humidity (non-condensing) - Storage Humidity: 5-95%, relative humidity (non-condensing)

Features - All ports support Full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps - Supports Auto-MDI/MDIX function - Supports IEEE 802.3X flow control for full-duplex mode and back pressure flow control for half-duplex mode - Store and forward Switching scheme Specifications - Standards and Protocols: • IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab , IEEE 802.3x - Interface: • 24 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) - Network Media: • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) - Fan Quantity: Fanless - Physical Security Lock: No - Power Supply: 100-240VAC, 50/60Hz - Dimensions ( W x D x H ) 17.3*7.1*1.7 in. (440*180*44 mm) - Mounting: Rack Mountable - Max Power Consumption: 13.62W - Max Heat Dissipation: 46.44BTU/h PERFORMANCE - Switching Capacity: 48Gbps - Packet Forwarding Rate: 35.7Mpps - MAC Address Table: 8K - Jumbo Frame: 10KB - QoS: 802.1p/DSCP QoS* *Only for V11 and later version - Green Technology: Yes - Transfer Method: Store-and-Forward OTHERS - Certification: FCC, CE, RoHS - Package Contents: • 24-Port Gigabit Rackmount Switch • Power Cord • Installation Guide • Rackmount Kits • Rubber Feet - Environment: • Operating Temperature: 0C~40C (32F~104F) • Storage Temperature: -40C~70C (-40F~158F) • Operating Humidity: 10%~90% non-condensing • Storage Humidity: 5%~90% non-condensing

POWER OVER ETHERNET - Port 1-8 of the switch support Power over Ethernet (PoE) function - These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs) INTELLIGENT POWER MANAGEMENT - When total power consumption excels 63W, the intelligent power management will cut the lower priority port power off to ensure the high priority ports power supply and protect the device from power overload operation STURDY METAL CASING - Sturdy, compact metal casing, with desktop/wall-mounting design, to meet your needs in any environment - Besides, fanless design ensures quiet operation Features - 9× 10/100/1000Mbps RJ45 ports, 1 Gigabit SFP port - With 8 PoE+ ports, transfers data and power on one single cable - Working with IEEE 802.3af/at compliant PDs, expands home and office network - 802.1p/DSCP QoS enable smooth latency-sensitive traffic - High PoE power budget with up to 30W for each PoE port and 63W for all PoE ports - Easy to use, with no configuration and installation needed Specifications HARDWARE FEATURES - Interface: * 8× PoE+ 10/100/1000Mbps RJ45 Ports * 1× 10/100/1000Mbps RJ45 Port * 1× Gigabit SFP Slot - Network Media: * 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) * EIA/TIA-568 100 Ohm STP (maximum 100m) * 100BASE-TX: UTP category 5, 5e cable (maximum 100m) * EIA/TIA-568 100 Ohm STP (maximum 100m) * 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) * EIA/TIA-568 100 Ohm STP (maximum 100m) * 1000BASE-X MMF, SMF - Fan Quantity: Fanless - Physical Security Lock: Yes - Power Supply: External Power Adapter(Output: 53.5VDC / 1.31A) - Backup Bandwidth: 20 Gbps - PoE+ Ports(RJ45): * Standard: 802.3at/802.3af compliant * PoE Ports: Port1- Port 8 * PoE Power Budget: 63W - Mac Address Table: 4K - Dimensions (W×D×H): 209×126×26 mm - Max Power Consumption: * 7.11 W (220/50Hz. no PD connected) * 78.13 W (220/50Hz. with 63W PD connected) - Max Heat Dissipation: * 24.25 BTU/h (no PD connected) * 266.42 BTU/h (with 63W PD connected) SOFTWARE FEATURES - Advanced Features: * Compatible With IEEE 802.3af/at Compliant PDs * EEE802.3x Flow Control * 802.1p/DSCP QoS * IGMP Snooping - Transmission Method: Store-And-Forward OTHERS - Certification: CE, FCC, RoHS - Package Contents: TL-SG1210P, Power Adapter, Installation Guide - Environment: Operating Temperature: 0C - 40C (32F - 104F) - Storage Temperature: -40C - 70C (-40F - 158F) - Operating Humidity: 10% - 90% non-condensing - Storage Humidity: 5% - 90% non-condensing

Switch TP-LINK 24-Port Gigabit Easy Smart Switch, 24 10/100/1000Mbps RJ45 ports, MTU/Port/Tag-based VLAN, QoS, IGMP Snooping

UBIQUITI Flex; (4) GbE PoE+ ports; (1) GbE PoE++ input port for power; 46W PoE availability* PoE++ input; 20W PoE availability PoE+ input; 8W PoE availability PoE input; Indoor/Outdoor.

UBIQUITI 8-Port Fully Managed Gigabit Switch with 4 IEEE 802.3af Includes 60W Power Supply, EU