Features - Scalable charging power up to 22 kW - Digital management of the charging stations via portal and app with the Webasto backend solution Webasto ChargeConnect - Always online thanks to 24/7 real-time transmission of the wallbox data to Webasto ChargeConnect - Authentification at the charging station using Scan Charge with the Webasto ChargeConnect App - Energy management system (EMS) integration via Modbus TCP - Local dynamic load management (stand-alone) * Automatically available from Q2 2022 through an over-the-air update - Integrated meter module for energy consumption monitoring and reporting - Clever product design with cable suspension and plug socket - Cost savings for installation thanks to integrated DC residual current protection - Remotely addressable by the grid operator via ripple control recei-ver to ensure grid stability - User friendly configuration using Wi-Fi hotspot and - Webasto Charger Setup App for installers Technical specifications ELECTRICAL CHARACHERISTIC - Nominal current (configurable connected load values): * 16A or 32A * Single phase or 3-phase * The charging station is configurable in 1A steps - Line voltage: 230/400V AC - Grid frequency: 50 Hz - Grid forms: * TN / TT (single phase and 3-phase) * IT (only single phase) * Splitphase (L1+L2, without N) - EMV class: * Emitted interference: Class B (residential, business, commercial areas) * Immunity: Industrial areas - Overvoltage category: III as per EN 60664 - Protection class: I - Necessary protective equipment: Residual current circuit breaker RCD type A and miniature circuit breakers must be provided on the installation side - Integrated protective equipment: DC residual current protection - Phase rotation: Automatic false phase-sequence detection CONNECTIONS - Mounting: Wall and pole mounting (permanently connected) - Cable feed: Mounted on-wall or in-wall - Connection cross-section (wire dimension): Cross-section of the connecting cable (Cu) taking into account the local conditions and norms: 6 or 10 mm2 for 16 A and 10 mm2 for 32 A - Charging cable: * Type 2 charging cable: up to 32 A / 400 VAC as per EN 62196-1 and EN 62196-2 * Length: 4.5 m - Integrated cable suspension and plug socket - Output voltage: 230 / 400V AC - Max. charging capacity: 22 kW COMMUNICATION FEATURES - Authentication: * "Scan Charge" via QR code * Webasto ChargeConnect Portal * Webasto ChargeConnect App - Display: RGB-LEDs, buzzer - Network interfaces : * LAN (RJ45) - 10 / 100 Base-TX * WLAN 802.11b/g - 54 Mbit/s * WLAN Hotspot - Communication protocols: OCPP 1.6 J (OCPP 2.0 ready), Modbus TCP - External interfaces: * Addressable via ripple control receiver through dry contacts * Integration into Energy Management Systems (EMS) - Local load management: Dynamic (stand-alone) by integration of an external smart meter * Automatically available from Q2 2022 through an over-the-air update MECHANICAL DATA - Dimensions (W×H×D): 225×447×116 mm - Weight: 5.7 kg - IP protection class, device: IP54 - Protection against mechanical impact: IK08 AMBIENT CONDITIONS - Installation site: No direct solar radiation - Operating temperature range: -30C to 45C - Temperature behavior A reduction in charging current or shutdown may occur in order to prevent the charging station overheating - Storage temperature range: -30C to +80C - Permissible relative humidity: 5% to 95% non-condensing - Altitude: Max. 3.000m above sea level CERTIFICATION COMPATIBILITY - Standards and guidelines: * CE conformity * 2014/53/EU Radio Equipment Directive * 2011/65/EU RoHS Directive * 2001/95/EG General Product Safety * 2012/19/EU Waste Electrical and Electronic Equipment Directive * 1907/2006 REACH Regulation - Backend integration: Webasto ChargeConnect, 3rd party backend integration via Weabasto ChargeConnect in preparation - Tested compatible energymanagement systems (EMS): Integration into various energy management systems (EMS) in preparation