- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)**, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Gigabit Ports: 1 gigabit SFP and 5 gigabit RJ45 ports provide high-speed wired connectivity. - Up to 4 WAN Ports: 1 gigabit SFP WAN port, 1 gigabit RJ45 WAN port, 2 gigabit WAN/LAN ports optimize bandwidth usage. - Highly Secure VPN: Supports up to 100× LAN-to-LAN IPsec, 50× OpenVPN*, 50× L2TP, and 50× PPTP VPN connections. - Abundant Security Features: Advanced firewall policies, DoS defense,IP/MAC/URL filtering, and more security functions protect your network and data. HARDWARE FEATURES - Standards and Protocols * IEEE 802.3, IEEE802.3u, IEEE802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1q * TCP/IP, DHCP, ICMP, NAT, PPPoE, NTP, HTTP, HTTPS, DNS, IPSec, PPTP, L2TP, OpenVPN, SNMP - Interface * 1 Fixed Gigabit SFP WAN Port * 1 Fixed Gigabit RJ45 WAN Port * 2 Fixed Gigabit RJ45 LAN Ports * 2 Changeable Gigabit RJ45 WAN/LAN Ports - Network Media * 10BASE-T: UTP category 3, 4, 5 cable (Max 100m) EIA/TIA-568 100? STP (Max 100m) * 100BASE-TX: UTP category 5, 5e cable (Max 100m) EIA/TIA-568 100? STP (Max 100m) * 1000BASE-T: UTP category 5, 5e, 6 cable (Max 100m) - Button: Reset Button - Power Supply: 100–240 V~50/60 Hz - Flash: SPI 4MB + NAND 128MB - DRAM: 512MB - LED: PWR, SYS, SFP WAN, WAN (Speed, Link/Act), LAN (Speed, Link/Act) - Dimensions ( W x D x H ): 8.9 × 5.2 × 1.4 in (226 × 131 × 35 mm) PERFORMANCE - Concurrent Session: 150,000 - IPsec VPN Throughput: 291.6 Mbps BASIC FUNCTIONS - WAN Connection Type * Static/Dynamic IP * PPPoE * PPTP * L2TP - MAC Clone: Modify WAN/LAN MAC Address† - DHCP * DHCP Server * DHCP Address Reservation * Multi-IP Interfaces* * Multi-Net DHCP* - IPv6: Developing‡ - VLAN: 802.1Q VLAN - IPTV: IGMP v2/v3 Proxy ADVANCED FUNCTIONS - ACL: IP/Port/Protocol/Domain Name Filtering - Advanced Routing * Static Routing * Policy Routing - Bandwidth Control * IP/Port-based Bandwidth Control * Guarantee Limited Bandwidth - Load Balance * Intelligent Load Balance * Application Optimized Routing * Link Backup (Timing§, Failover) * Online Detection - NAT * One-to-One NAT§ * Multi-Net NAT * Virtual Server * Port Triggering§ * NAT-DMZ * FTP/H.323/SIP/IPSec/PPTP ALG, UPnP - Security * SPI Firewall * VPN Passthrough * FTP/H.323/PPTP/SIP/IPsec ALG * DoS Defence, Ping of Death * Local Management - Session Limit: IP-based Session Limit VPN - IPsec VPN * 100 IPSec VPN Tunnels * LAN-to-LAN, Client-to-LAN * Main, Aggressive Negotiation Mode * DES, 3DES, AES128, AES192, AES256 Encryption Algorithm * IKEv1/v2* * MD5, SHA1 Authentication Algorithm * NAT Traversal (NAT-T) * Dead Peer Detection (DPD) * Perfect Forward Secrecy (PFS) - PPTP VPN * PPTP VPN Server * 10 PPTP VPN Clients * 50 Tunnels * PPTP with MPPE Encryption - L2TP VPN * L2TP VPN Server * 10 L2TP VPN Clients * 50 Tunnels * L2TP over IPSec - OpenVPN * OpenVPN Server * 10 OpenVPN Clients* * 50 OpenVPN Tunnels* SECURITY - Filtering: * WEB Group Filtering§ * URL Filtering * Web Security§ - ARP Inspection * Sending GARP Packets§ * ARP Scanning§ * IP-MAC Binding§ - Attack Defense * TCP/UDP/ICMP Flood Defense * Block TCP Scan (Stealth FIN/Xmas/Null) * Block Ping from WAN - Access Control: Source/Destination IP Based Access Control AUTHENTICATION - Web Authentication * No Authentication * Simple Password* * Hotspot(Local User / Voucher* / SMS* / Radius*) * External Radius Sever * External Portal Sever* * Facebook* MANAGEMENT - Omada App: Yes - Centralized Management * Omada Cloud-Based Controller * Omada Hardware Controller (OC300) * Omada Hardware Controller (OC200) * Omada Software Controller - Cloud Access: Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller) - Service: Dynamic DNS (Dyndns, No-IP, Peanuthull, Comexe) - Maintenance * Web Management Interface * Remote Management * Export Import Configuration * SNMP v1/v2c/v3* * Diagnostics (Ping Traceroute)§ * NTP Synchronize§ * Syslog Support - Management Features * Automatic Device Discovery * Intelligent Network Monitoring * Abnormal Event Warnings * Unified Configuration * Reboot Schedule * Captive Portal Configuration * ZTP (Zero-Touch Provisioning)** OTHERS - Certification: CE, FCC, RoHS - Package Contents * TL-ER7206 * Power Cord * Quick Installation Guide - System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/8.1/10, MAC OS, NetWare, UNIX or Linux - Environment * Operating Temperature: 0–40 ? (32–104 ?); * Storage Temperature: -40–70 ? (-40–158 ?) * Operating Humidity: 10–90% RH non-condensing * Storage Humidity: 5–90% RH non-condensing

- A drop-in Wi-Fi 6 upgrade for the popular mANTBox dual-band sector antenna base stations. One powerful package for all your outdoor network needs, perfect for camps, stadiums and parks. Managing outdoor wireless network has never been easier: mANTBox ax 15s can provide unparalleled wireless point-to-multipoint connectivity for a vast variety of devices over a distance of 20 kilometers! - A potent combination of modern dual-core ARM CPUs, our latest 802.11ax Wi-Fi 6 dual-band radios and powerful built-in sector antennas will take your signal stability, speed, and responsiveness to the next level! There’s a Gigabit Ethernet port with PoE-in and an SFP port with 2.5 Gigabit support for extra fast fiber uplinks. - Upgrading your setup to Wi-Fi 6 offers multiple benefits: - Speed: we’ve seen up to 40% higher speed in the 5 GHz spectrum and up to 90% higher speed in the 2.4 GHz spectrum. - Security: WPA3 encryption and management frame protection prevent all sorts of attacks, like bruteforcing and WPA2 handshake?capture deauthentication attacks - Reliability: seamless fast transition (roaming) enables smooth, non-stop signal when you have to switch between access points. Also, Wi-Fi 6 ensures a fair traffic distribution if the connection is shared by a large number of users. - Energy efficiency: features like Target Wake Time reduce power consumption in the long run. Better for your wallet and the planet! - mANTBox package includes everything you need: a Gigabit PoE injector, a power supply, a hose clamp and a fastening set, and the MikroTik quickMOUNT pro. This advanced wall mount adapter allows turning antenna within 140° both horizontally and vertically. With the quickMOUNT pro it is possible to perfectly set antenna alignment using an integrated graduated scale. Specifications Details - Product code: L22UGS-5HaxD2HaxD-15S - Architecture: ARM 64bit - CPU: IPQ-5010 - CPU core count: 2 - CPU nominal frequency: 800 MHz - RouterOS license: 4 - Operating System: RouterOS v7 - Size of RAM: 256 MB - Storage size: 128 MB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C -Tested ambient temperature: -40°C to 70°C Powering - Number of DC inputs: 2 (DC jack, PoE-IN) - DC jack input Voltage: 12-28 V - Max power consumption: 21 W - Max power consumption without attachments: 11 W - Cooling type: Passive - PoE in: Passive PoE - PoE in input Voltage: 18-28 V Wireless specifications - Wireless 2.4 GHz Max data rate: 574 Mbit/s - Wireless 2.4 GHz number of chains: 2 - Wireless 2.4 GHz standards: 802.11b/g/n/ax - Antenna gain dBi for 2.4 GHz: 12 -Wireless 2.4 GHz chip model: IPQ-5010 - Wireless 2.4 GHz generation: Wi-Fi 6 - Wireless 5 GHz Max data rate: 2400 Mbit/s - Wireless 5 GHz number of chains: 2 - Wireless 5 GHz standards: 802.11a/n/ac/ax - Antenna gain dBi for 5 GHz: 15 - Wireless 5 GHz chip model: QCN-6102 - Wireless 5 GHz generation: Wi-Fi 6 Ethernet - 10/100/1000 Ethernet ports: 1 Fiber - SFP ports: 1 (2.5G supported) Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB type A - Max USB current (A): 1.5 Other - PCB temperature monitor: Yes - Voltage Monitor: Yes - Beeper: Yes Certification Approvals - Certification: CE, FCC, IC, EAC, ROHS - IP: 55 Wireless specifications 2.4 GHz Transmit (dBm) Receive Sensitivity 1MBit/s 27 -100 11MBit/s 27 -94 6MBit/s 29 -96 54MBit/s 27 -80 MCS0 29 -96 MCS7 26 -75 MCS9 24 -70 MCS11 22 -67 5 GHz Transmit (dBm) Receive Sensitivity 6MBit/s 28 -96 54MBit/s 26 -80 MCS0 28 -96 MCS7 25 -75 MCS9 23 -70 MCS11 22 -67 Included parts - 24V 1.2A power adapter - Gigabit PoE injector - Hose clamp 1 - QMP - K-41 fastening set

UBIQUITI U6 Long-Range; WiFi 6; 8 spatial streams; 185 m2 (2,000 ft2) coverage; 350+ connected devices; Powered using PoE+; GbE uplink.

- RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration - The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit - The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black - RB4011iGS+RM (Ethernet model) includes two rackmount ears that will securely fasten the unit in a standard 1U rack space Specifications - Architecture: ARM 32bit - CPU: AL21400 - CPU core count: 4 - CPU nominal frequency: 1400 MHz - Dimensions: 228×120×30 mm - License level: 5 - Operating System: RouterOS - Size of RAM: 1 GB - Storage size: 512 MB - Storage type: NAND - Tested ambient temperature: -40C to 70C POWERING - PoE in: Passive PoE - PoE out: Passive PoE up to 57V - PoE in input Voltage: 18-57 V - Number of DC inputs: 2 (DC jack, PoE-IN) - DC jack input Voltage: 12-57 V - Max out per port output (input > 30 V): 400 mA - Max out per port output (input < 30 V): 600 mA - Max total out (A): 600 mA - Max power consumption: 33 W - Max power consumption without attachments: 18 W ETHERNET - 10/100/1000 Ethernet ports: 10 FIBER - SFP+ ports: 1 PERIPHERALS - Serial port: RJ45 OTHER - PCB temperature monitor: Yes - Voltage Monitor: Yes INCLUDED PARTS - 24V / 1.5A power adapter - 4011 ears

- The Wireless Wire is a ground breaking solution which offers fiber speed and quality for a fraction of the price - This amazing kit replaces your Gigabit ethernet cable with two small devices that connect to each other over a 60 GHz wireless link - Simply point the included devices at one another and power them on, it will make a 1 Gbit full duplex link to instantly replace your cable - this is why we call it the Wireless Wire! - The Wireless Wire makes secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 100 meters or more - The box includes two wAP60G devices that are already paired together, a wall mounting kit, straps for pole mounting and also a pair of table stands for using the devices indoors - The link will even work through most windows, depending on their material Specifications - Architecture: ARM 32bit - CPU: IPQ-4019 - CPU core count: 4 - CPU nominal frequency: 716 MHz - Dimensions: 185×85×30 mm - License level: 3 - Operating System: RouterOS - Size of RAM: 256 MB - Storage size: 16 MB - Storage type: FLASH POWERING - Max Power consumption: 5W - PoE in: 802.3af/at - PoE in input Voltage: 12-57 V - Number of DC inputs: 2 (DC jack, PoE-IN) - DC jack input Voltage: 12-57 V ETHERNET - 10/100/1000 Ethernet ports: 1 INCLUDED PARTS - 24V 0.38A power adapter - Gigabit PoE injector - Plastic zip tie - wAP desktop stand - wAP mount bracket - Metal ring (one)

- The ultimate heavy-duty home lab router with USB 3.0, 1G and 2.5G Ethernet and a 10G SFP+ cage. You can mount four of these new routers in a single 1U rackmount space! Unprecedented processing power in such a small form factor. - Double the usual performance: we took your feedback from the MikroTik User Meetings to create the perfect home lab router: compact, powerful, with multiple powering options and efficient cooling.RB5009 has it all, and even more! - The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet, another one is 2.5 Gigabit Ethernet, and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink! - RB5009UG+S+IN can be powered in 3 different ways: a) PoE-in from Ethernet port #1 b) DC Jack c) 2-pin terminal on the side - Boards come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components, compared to our other products in a similar form factor, provides almost double the performance in configurations with heavy CPU loads. - With a simple set of mounting accessories, you can mount FOUR of these routers in a single 1U rackmount space! No more server-room-Tetris, just pure productivity. Specifications Details - Product code: RB5009UG+S+IN - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS (v7 only) - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 60°C - IPsec hardware acceleration: Yes Powering - Number of DC inputs: 3 (DC jack, 2-pin terminal, PoE-IN) - DC jack input Voltage: 24-57 V - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 20 W - Max power consumption without attachments: 14 W - Cooling type: Passive - PoE in: 802.3af/at - PoE in input Voltage: 24-57 V Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 2.5G Ethernet ports: 1 Fiber - SFP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1 Details - CPU temperature monitor: Yes Certification Approvals - Certification CE, EAC, ROHS

- Manage Your Networks from a Single Control Plane - Intuitive and Robust Configuration, Control and Monitoring - Remote Firmware Upgrade - Users and Guests - Guest Portal/Hotspot Support - The UniFi Switch delivers quiet yet powerful performance with its 10 independent switching ports - Sharing a total of 150W PoE, eight Gigabit Ethernet ports offer 802.3af/at PoE+ or 24V passive PoE, and two SFP ports offer optical connectivity Specifications - Total Non-Blocking Throughput: 10 Gbps - Switching Capacity: 20 Gbps - Forwarding Rate: 14.88 Mpps - Max. Power Consumption: * Including PoE Output: 150W * Excluding PoE Output: 20W - Power Method: 100-240VAC/50-60 Hz, Universal Input - Power Supply: AC/DC, Internal, 150W DC - Networking Interface: * 8× 10/100/1000 Mbps RJ45 Ethernet Ports * 2× 1 Gbps SFP Ethernet Ports - Management Interface: Ethernet In Band - Certifications: CE, FCC, IC - Operating Temperature: -5C to 40C (23F to 104F) - Operating Humidity: 5% to 95% Noncondensing - Dimensions: 204×43×235 mm - Weight: 1.7 kg

- Layer 2 switch with (24) GbE RJ45 ports and (2) 1G SFP ports. - The Switch 24 (USW 24) is a fully managed, fanless switch with (24) GbE RJ45 ports and (2) 1G SFP ports. - The versatile USW 24 provides Gigabit links to Ethernet devices while also supplying Gigabit fiber uplink options fit for an enterprise network. - The switch also offers an extensive suite of Layer 2 switching protocols, including port-specific operation modes (switching, mirroring, or aggregate), and features a 1.3" LCM color touchscreen that concisely displays key system and connection insights. - This switch can also be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app. Features - (24) GbE RJ45 ports - (2) 1G SFP ports - (1) 1.3" LCM color touchscreen with AR switch management - Fanless, silent cooling * Managed with the UniFi Network application: Version 5.12.32 and later Works with the UniFi Network Application - Manage your networks from a single interface. - Enjoy intuitive configuration options, as well as robust device control and monitoring. - Upgrade device firmware remotely. - Easily manage network users and guests. - Personalize the design, architecture, and privacy of guest hotspots. Specifications - Total Non-Blocking Throughput: 26 Gbps - Switching Capacity: 52 Gbps - Forwarding Rate: 38.69 Mpps - Max. Power Consumption: 25W - Power Method: Universal AC Input: 100-240VAC, 50/60 Hz - Power Supply: AC/DC, Internal, 36W - Networking Interfaces: 24× 10/100/1000 Mbps Ethernet RJ45 Ports, 2× 1 Gbps SFP Ports - Management Interface: Ethernet In-Band - Modes: SMB Layer 2 Gigabit Ethernet Switch - ESD/EMP Protection: Air: ± 16 kV, Contact: ± 12 kV - Operating Temperature: -5 to 40° C (23 to 104° F) - Operating Humidity: 10 - 90% Noncondensing - Certifications: CE, FCC, IC LEDs - System * (1) Bootup Animation: Bootup in Progress * Firmware Upgrade Icon: Firmware Upgrading * Steady White: Factory Defaults, Awaiting Adoption * Steady Blue: Device is Adopted - Ethernet: Green: 1G, Amber: 10/100 Mbps - SFP: Green: 1G

- RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration - The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit - The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black - RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz - For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot - RB4011iGS+5HacQ2HnD-IN (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations) Specifications - Architecture: ARM 32bit - CPU: AL21400 - CPU core count: 4 - CPU nominal frequency: 1.4 GHz - Dimensions: 228×120×30 mm - License level: 5 - Operating System: RouterOS - Size of RAM: 1 GB - Storage size: 512 MB - Storage type: NAND - Tested ambient temperature: -40C to 45C POWERING - PoE in: Passive PoE - PoE out: Passive PoE up to 57V - PoE in input Voltage: 18-57 V - Number of DC inputs: 2 (DC jack, PoE-IN) - DC jack input Voltage: 12-57 V - Max out per port output (input > 30 V): 420 mA - Max out per port output (input < 30 V): 600 mA - Max total out (A): 600 mA - Max power consumption: 44 W - Max power consumption without attachments: 23 W WIRELESS - Wireless 5 GHz number of chains: 4 - Wireless 5 GHz standards: 802.11ac MU-MIMO - Antenna gain dBi for 5 GHz: 3 - Wireless 5 GHz chip model: R11e-2HnD - Wireless 2.4 GHz number of chains: 2 - Wireless 2.4 GHz standards: 802.11b/g/n - Antenna gain dBi for 2.4 GHz: 3 - Wireless 2.4 GHz chip model: R11e-2HnD ETHERNET - 10/100/1000 Ethernet ports: 10 FIBER - SFP+ ports: 1 PERIPHERALS - MiniPCI-e slots: 1 - Serial port: RJ45 OTHER - PCB temperature monitor: Yes - Voltage Monitor: Yes INCLUDED PARTS - 24V / 2.5A power adapter - IEC cord

- Our team has gathered and taken into account your feedback to make a worthy successor of our popular Wireless Wire Dish - Now we are proud to present the best plug-and-play 60 GHz point-to-point link solution to date - the Wireless Wire nRAY - It is a kit of two pre-paired devices that make a secure AES encrypted wireless connection - It can easily cover a distance of 1500 meters and reach fiber-like speed, and we have made some serious structural improvements - With the latest antenna technologies, this device is very compact, but even more durable than its predecessors - The new form-factor has been designed with snowy areas in mind - you won’t have to worry about huge chunks of snow getting stuck and messing with the signal - Due to its size and shape, the nRAY also attracts less unwanted attention - Using the special fine-tune adjustment screws, a perfect alignment can be achieved - The 60 GHz frequency is unaffected by the crowded wireless spectrum, so you can enjoy a smooth connection even in a busy urban environment - A powerful arm64 dual-core CPU running at 1 GHz ensures wire speed throughput in nearly all packet sizes - The included devices are preconfigured to connect automatically, simply point them at one another and power them on! - We have included the power supplies, PoE injectors and a handy precision mount for easier alignment - the solidMOUNT - It is an advanced pole mount metal adapter that allows adjustment both vertically and horizontally Specifications - Architecture: ARM 64bit - CPU: 88F3720 - CPU core count: 2 - CPU nominal frequency: 1.00 GHz - Dimensions: 261×166 mm - RouterOS license: 3 - Operating System: RouterOS - Size of RAM: 256 MB - Storage size: 16 MB - Storage type: FLASH - Tested ambient temperature: -30C to 70C - MTBF: Appr. 200.000 hours at 25C POWERING - PoE in: 802.3af/at - PoE in input Voltage: 12-57 V - Number of DC inputs: 1 (PoE-IN) - Max power consumption: 6 W - FAN count: Passive ETHERNET - 10/100/1000 Ethernet ports: 1 INCLUDED PARTS - 24V 0.38A power adapter - nRAY solidMOUNT - Gigabit PoE injector

IT’S ALL ABOUT THE POWER... - This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! - All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those. - Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS354 CRS328. In the smallest possible form-factor and for the best price on the market! PROTECT YOUR UPTIME, PROTECT YOUR TRANQUILITY! - So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack. - What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually. - This tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount space With the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions. With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability. Specifications - Architecture: ARM 64bit - CPU: 88F7040 - CPU core count: 4 - CPU nominal frequency: 350-1400 (auto) MHz - Switch chip model: 88E6393 - RouterOS license: 5 - Operating System: RouterOS (v7 only) - Size of RAM: 1 GB - Storage size: 1 GB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -40°C to 60°C - IPsec hardware acceleration : Yes Powering - Number of DC inputs: 3 (DC jack, PoE-IN, 2-pin terminal) - DC jack input Voltage: 24-57 V - 2-pin terminal input Voltage: 24-57 V - Max power consumption: 150 W - Max power consumption without attachments: 15 W - Cooling type: Passive - PoE in: 802.3af/at (ether1), Mode B (ether2-ether8) - PoE in input Voltage: 24-57 V PoE-out - PoE-out ports: Ether1-Ether8 - PoE out: 802.3af/at - Max out per port output (input 18-30 V): 640 mA - Max out per port output (input 30-57 V): 420 mA - Max total out (A): 2.59 A - Total output current: 2.28 - Total output power: 130 Ethernet - 10/100/1000 Ethernet ports: 7 - Number of 1G Ethernet ports with Reverse PoE (PoE-in): 7 - Number of 2.5G Ethernet ports: 1 - Number of 2.5G Ethernet ports with Reverse PoE (PoE-in): 1 Fiber - S-FP+ ports: 1 Peripherals - Number of USB ports: 1 - USB Power Reset: Yes - USB slot type: USB 3.0 type A - Max USB current (A): 1 Other - CPU temperature monitor: Yes - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification Approvals - Certification: CE, EAC, ROHS - IP: 20

Ubiquiti Powerful, ceiling-mounted WiFi 6E access point designed to provide seamless, multi-band coverage within high-density client environments

- Introducing RB1100AHx4, 13× Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbit. The device supports IPsec hardware acceleration (up to 2.2Gbps with AES128) - Unit comes with 1U rackmount case, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support) Specifications - Architecture: ARM 32bit - CPU: AL21400-1400-A0-E-1AN-8-C - CPU core count: 4 - CPU nominal frequency: 1.4 GHz - Dimensions: 444×148×47 mm -License level: 6 - Operating System: RouterOS -Size of RAM: 1 GB - Storage size: 128 MB - Storage type: NAND Powering - Max Power consumption: 20W - Number of DC inputs: 2 (PoE-IN, 2-pin terminal) - PoE in: 802.3af/at - PoE in input Voltage: 20-57 V - 2-pin terminal input Voltage: -48, 12-57 V - Number of AC inputs: 2 - AC input range: 100-240 V Ethernet - 10/100/1000 Ethernet ports: 1 Peripherals - Serial port: RS232 Other - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes - Included parts: * K10 R2 screw kit * Rack ears * IEC cord

- New RB1100AHx4 Dude Edition has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbps - The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to 2.2Gbps with AES128) - Unit comes with 1U rackmount case, 13x Gigabit Ethernet ports, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support) - The RB1100AHx4 Dude edition features several high speed storage connectors (two SATA and two M.2) for using a Dude database, proxy cache or any other storage intensive feature - It includes a 60GB M.2 drive already installed Specifications - Architecture: ARM 32bit - CPU: AL21400 - CPU core count: 4 - CPU nominal frequency: 1.4 GHz - Dimensions: 443×148×44 mm - RouterOS license: 6 - Operating System: RouterOS - Size of RAM: 1 GB - Storage size: 128 MB - Storage type: NAND - MTBF: Approximately 200.000 hours at 25C - Tested ambient temperature: -40°C to 70°C - IPsec hardware acceleration: Yes POWERING - Number of AC inputs: 2 - Number of DC inputs: 2 (2-pin terminal, PoE-IN) - 2-pin terminal input Voltage: -48, 20-57 V - Max power consumption: 33 W - Max power consumption without attachments: 25 W - Cooling type: Passive - PoE in: 802.3af/at - PoE in input Voltage: 20-57 V ETHERNET - 10/100/1000 Ethernet ports: 13 PERIPHERALS - Extended storage: 60GB M.2 SSD included - Memory card type: microSD - Memory Cards: 1 - SATA ports: 2× SATA3 - Serial console port: RS232 - Number of M.2 slots: 2 OTHER - Current Monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes CERTIFICATION APPROVALS - Certification: CE, EAC, ROHS - IP: IP20 INCLUDED PARTS - SATA cables - Rack ears - M.2 SSD 60GB - Screw and feet kit (K10) - 2× IEC cords

1U Rackmount 10Gbps UniFi Multi-Application System with 3.5" HDD Expansion and 8Port Switch

CCR2004-16G-2S+ - This powerful and affordable router crushes all previous CCR models in single-core performance. 16x Gigabit Ethernet ports, 2x10G SFP+ cages, active cooling and the best single-core performance per watt best overall performance per watt among all the CCR devices. - Like the other models in CCR2004 series, this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1,7GHz. But here’s the difference. This powerful router crushes all previous CCR models in single-core performance, and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example.But that’s not all! It also has the best single-core performance per watt and best overall performance per watt among all the CCR devices. Better for the planet, better for the bills, it’s a win-win! - The new router has 18 wired ports, including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a RJ-45 console port on the front panel. Like all CCR devices, it comes in a classic white 1U rackmount case. Built-in dual redundant power supplies are included, so you have one less thing to worry about. And, of course, there is active cooling to keep things nice and cool. Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch-chip. Each switch chip has a 10 Gbps full-duplex line connected to the CPU. The same goes for each SFP+ cage - a separate 10 Gbps full-duplex line. Boards come with 4GB of DDR4 RAM and 128MB of NAND storage. - So as you can see - no bottlenecks. As long as the CPU can handle the processing, all ports can reach wire speed. And this CPU is a beast that can handle a lot. If we look at the performance, you can see that it is trading blows with our CCR1009. Even surpassing it in CPU-heavy configurations! And if that wasn’t enough – it can even reach the performance of CCR1016. - The best part? This brand new CCR is among the most affordable options out there - not only within the CCR series, but on the market in general.One of the most common ways to use this device would be: Gigabit Ethernet ports for the internal network; SFP+ ports for downlink and uplink. The perfect all-in-one solution for small and medium-sized businesses. Easy and efficient. - With the new CCR2004, you can take your office network to the next level. Without breaking the bank. Specifications - Product code: CCR2004-16G-2S+ - Architecture: ARM 64bit - CPU: AL32400 - CPU core count: 4 - CPU nominal frequency: 1700 MHz - Switch chip model: 88E6191X - Dimensions: 443 x 210 x 44 mm - RouterOS license: 6 - Operating System: RouterOS v7 - Size of RAM: 4 GB - Storage size: 128 MB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -20°C to 60°C - IPsec hardware acceleration: Yes Powering - Number of AC inputs: 2 - AC input range: 100-240 - Frequency (Hz): 50-60 - Max power consumption: 48 W - Max power consumption without attachments: 35 W - Cooling type: 2 fans Ethernet - 10/100/1000 Ethernet ports: 16 Fiber - SFP+ ports: 2 Peripherals - Serial console port: RJ45 Other - CPU temperature monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes Certification Approvals - Certification: CE, EAC, ROHS - IP: IP20

- The "Improvise. Adapt. Overcome" mindset can be very helpful, but sometimes you simply need a device that works and solves the problem without additional tinkering - The CCR2004-1G-12S+2XS does just that - forget about all connectivity troubles and expand your setup in any way you please - This handy router features 12 x 10G SFP+ and 2 x 25G SFP28 ports - CCR2004-1G-12S+2XS is our router with the most powerful single-core performance so far - It provides incredible results in single tunnel (up to 3.4 Gbps) and BGP feed processing - Be prepared for anything: 10G, 40G and now 25G! Paired with such MikroTik multiport products as CRS317-1G-16S+RM, CRS312-4C+8XG-RM and CRS326-24S+2Q+RM, your networking setup will know no bounds - Performance-wise, CCR2004-1G-12S+2XS is on par with the renowned CCR1009/CCR1016 routers - And with dual redundant power supply you can forget about unexpected downtime! - With its elaborate port configuration, the new CCR2004-1G-12S+2XS is the perfect addition to any professional networking arsenal - it will save you tons of time in some tricky situations! - Size of RAM in RouterOS v6 1792MB ECC / RouterOS v7 4GB ECC Specifications - Architecture: ARM 64bit - CPU: AL32400 - CPU core count: 4 - CPU nominal frequency: 1700 MHz - Dimensions: 443×224×44 mm - RouterOS license: 6 - Operating System: RouterOS - Size of RAM: 4 GB - Storage size: 128 MB - Storage type: NAND - MTBF: Approximately 200000 hours at 25C - Tested ambient temperature: -20C to 60C - IPsec hardware acceleration: Yes POWERING - Number of AC inputs: 2 - AC input range: 100-240 - Max power consumption: 49 W - Max power consumption without attachments: 32 W - Cooling type: 2 ETHERNET - 10/100/1000 Ethernet ports: 1 FIBER - SFP+ ports: 12 - Number of 25G SFP28 ports: 2 PERIPHERALS - Serial console port: RJ45 OTHER - CPU temperature monitor: Yes - PCB temperature monitor: Yes - Voltage Monitor: Yes CERTIFICATION APPROVALS - Certification: CE, EAC, ROHS INCLUDED PARTS - 2× IEC cords - Screw and feet kit (K10) - Rackmount bracket white